|
|
|
|
|
|
|
|
|
|
|
Yellow zinc dichromate plated spring wire. Use For: Farm and Other Applications.
|
Yellow zinc dichromate plated spring wire. Use For: Farm and Other Applications.
|
Yellow zinc dichromate plated spring wire. Use For: Farm and Other Applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
Factory number indicated thickness (inches).
|
For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
|
Use as an adjustable replacement pin. Multiple holes allow user to cut off excess length. Yellow zinc dichromate plated
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow zinc dichromate plated spring wire. Use For: Farm and Other Applications.
|
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2. WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
|
Use as an adjustable replacement pin. Multiple holes allow user to cut off excess length. Yellow zinc dichromate plated
|
|
|
|
|
|
|
|
|
|
|
|
|
Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
|
Factory number indicated thickness (inches).
|
For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2. WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
Use as an adjustable replacement pin. Multiple holes allow user to cut off excess length. Yellow zinc dichromate plated
|
|
|
|
|
|
|
|
|
|
|
|
|
For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
|
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
|
Factory number indicated thickness (inches).
|
|
|
|
|
|
|
|
|
|
|
|
|
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
|
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
|
Use as an adjustable replacement pin. Multiple holes allow user to cut off excess length. Yellow zinc dichromate plated
|
|
|
|
|
|
|
|
|
|
|
|
|
WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
|
Campbell Welded Ring, NO 7 Chain, 1-1/4 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
|
Baron Spring Snap, Round Swivel Eye, 30 lb, 3/16 in Snap Opening, 1/2 in Eye Width, 2-1/2 in Overall Length, Die-Cast Zinc, Nickel-Plated, For Use With Chain Gates and Dog Leashes
|
|
|
|
|
|
|
|
|
|
|
|
|
Baron Spring Snap, Open Eye, 9/32 in Snap Opening, 3-3/8 in Overall Length, Steel, Nickel Plated
|
Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1
|
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2. WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
|
|