|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features a solid one-piece construction, magnetic tip, and complete quick-change compatibility. Deep #2 driver resists cam-out. Includes one of each: 3" and 6".
|
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
|
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
|
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
|
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
|
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Sets below the surface of the wood when joining 1/2" stock.
|
Made from nickel-plated steel and used for accurate match and transfer of dowel holes. Includes: (2) two each: 1/4", 5/16", 3/8? and 1/2".
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
|
For use with the Kreg Jig HD and 1-1/2'' and larger stock. Large 2-1/2'' long #14 hardened-steel screws provide ideal shear resistance as well as a Protec-Kote finish with three anti-corrosion layers for long-term moisture resistance.
|
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For a wide variety of indoor projects with limited exposure to the elements. Provides adequate rust protection. Washer-head provides a large amount of surface area on the head of the screw, helping to ensure the strongest possible hold.
|
6'' driver with deep #3 square drive. Optimized for use with Kreg Jig HD screws. Solid one-piece construction, magnetic tip, and complete quick-change compatibility for fast and easy bit changes.
|
Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for depth control when drilling with twist and brad point drill bits. Made of cold rolled steel with black oxide finish. Includes (1) one each: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", hex wrench and reusable snap blister.
|
Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
|
Features three anti-corrosion layers, allowing them to be used for indoor and outdoor applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for joints where strength is critical; biscuits swell in joints for maximum strength.
|
Use for joints where strength is critical; biscuits swell in joints for maximum strength.
|
Use for joints where strength is critical; biscuits swell in joints for maximum strength.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for joints where strength is critical; biscuits swell in joints for maximum strength.
|
Use for joints where strength is critical; biscuits swell in joints for maximum strength.
|
Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick.
|
Use to hide or decoratively accent exposed pocket holes. Works with materials from 1/2" to 1-1/2" thick.
|
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks, or making dowels; 1/4" inch shank.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks, or making dowels; 1/4" inch shank.
|
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks, or making dowels; 1/4" inch shank.
|
Made of hardened, high-carbon steel for strength and durability when working in applications such as covering fastener holes in furniture, cabinetry, floors, decks, or making dowels; 1/4" inch shank.
|
|
|
