Home > SPORTING GOODS > MARINE, HUNTING & CAMPING > MARINE/BOATS & ACCESSORIES > DOCK KITS/DOCK HARDWARE
Sort By:
1
BACK PLATE COMM GRAD .25X1.5X5 PIPE SAFETY CAPS 4PIEC 1.5X3X3 GUSSET COMMER GRADE .25X1.25X8
Heavy duty hot dipped galvanized washer. Fits 1 5/8" outside diameter pipe. Packaged in set of 4. Reinforces inside corners.
Playstar PS 1412 Standard Duty Inside Corner Bracket CLEAT DOCK RESIN 1.5 X 1 X8 IN Playstar PS 1015 Joist Corner Bracket
Powder coated steel reinforces dock frame corners. 8" cleat with large tie off area. Mounts with two screws (Not Included). Reinforces and supports frame.
FLOATNG DCK PIPE SLEEV STANDRD DOCK CONNECTOR CLIPS STAN GALV Playstar PS 1145 Dock Float Hardware
Fits 1 5/8" outside diameter pipe. Use to connect roll in and stationary dock sections. Hot-dipped galvanized for long life. Includes enough screws and washers to attach 3 PlayStar marine dock floats to frames. Contains twelve 3/8" x 2" lag screws and twelve 3/8" flat washers.
MOORING RING 3 IN HVY DTY GALV Playstar PS 1135 Dock Frame Hardware DOCK CONNCTR CLIP 5 X 7.25 X 5
3" heavy duty ring. Hot dipped galvanized for long life. Hot-dipped galvanized for long life. Includes fasteners for use with PlayStar's Framing Kits, Hinge Kits, and Pipe Sleeves. Contains twelve 3/8"-16 x 3" carriage bolts, twelve 3/8" flat washers, twelve 3/8" lock washers, and twelve 3/8" nuts. Securely attaches stationary and roll in docks. Hot dipped galvanized for long life.
Playstar PS 1011 Inside Corner Bracket FOOT PLATE COMM GRADE 2.25X6X6 BUMPER TORPEDO FOAT 5.7X5.7X17
Hot dipped galvanized for long life.  Prevents twisting and bending. Fits 1 5/8" and 1 7/8" diameter pipe. Inflatable. For use on boats. Protects all sizes of boats.
FLOATING DOCK AUGER STANDARD  Playstar PS 1013 Outside Corner Bracket 5 in L x 8 in W x 8 in H DOCK BUMPER MULT PUR 2.5X15.76
Easily, and securely, anchors dock pipe to bottom. One piece, heavy-duty cast iron construction securely fastens to pipe with single stainless steel nut and bolt. Hot dipped galvanized for long life. Use with No.PS1080 Commercial Grade pipe sleeve. For use with 1-5/8" O.D. and 1-7/8" O.D. dock pipe. Hot dipped galvanized for long life.  Securely ties frame together. Easily installs on any dock. Mount horizontally or vertically. Protects against nicks and scratches.
FLOATING DOCK PIPE SLEEVE 2 PC DOCK HINGE KIT FLOATING MARINE PIPE SLEEVE BUMPR 3.75X4.75X14
Holds dock in place while accommodating changing water levels. Two-Piece construction allows pipe to be left in water if dock is removed. Removable insert for various pipe sizes. Accommodates standard 1-5/8" and 1-7/8". O.D. schedule 40 pipe. Allows modular connections for working with smaller, lighter dock sections. Connects floating sections together quickly and easily with clevis pin of male/female assembly that bolts to frame kit hole pattern or wherever desired with No.PS1135 hardware kit. Heavy-gauge, hot dipped galvanized steel for long life. Includes male clevis, female clevis, and clevis pin with clip. Fits PlayStar commercial grade and standard pipe sleeves. Easily adjusts without removal.
DOCK WHEEL KITS 23 IN DIAMETER DOCK KIT STANDARD 4X6 PLAYSTAR DOCK FLOAT POLY HOLLOW 48X36X9
Makes installation and removal of your dock easy with less effort. 23'' diameter wheel with 1-5/8'' diameter hub. For use with dock axle kit. Builds 4' x 6' wood dock frame. Powder coated bracket ties 2' x 6' wood frame together for roll or stationary in dock sections. (Lumber and screws sold separately). Highly engineered, easy to handle design with large surface area for stability. Built to withstand damaging agents of gas, oil, salt water, and UV light. One-piece design with no seams to leak. Made of environmentally friendly, maintenance-free, automotive-grade fuel-tank, high-density polyethylene. Accessible flanges for easy mounting to frame with No.PS1145 hardware kit. Supports from 33.20 lbs. submerged to 1" to 500.00 lbs. submerged 9".
DOCK AXLE KIT 4 X 24.75 X 5.25 DOCK LADDER ADJ RESIN HVY DUTY DOCK KT COMM GRADE 4X10 PLYSTR
Makes dock installation and removal easy. Kit contains 4 axle brackets, 2 stabilizer braces, 2 nylon axle sleeves and 2 U-Straps. Use with PlayStar dock wheels. Dock pipes required. (Purchased Separately). Resin dock ladder with hot-dipped galvanized mounting brackets and hardware. Adjusts to 4 step (36'') or 5 step (47'') to fit your application. 20'' extra wide opening. Will not crack, fade or rust. No sharp edge. Stays cool to the touch. Easy to install. Tall arch design for stable climbing. Ergonomic hand rails for secure no-slip grip. Deep steps with ribbed surface ensures traction. Made in America. 350 lb. weight rating. Builds 4' x 10' wood dock frame. Heavy duty, hot dipped galvanized components securely ties 2' x 6' wood frame together for stationary, roll in or floating dock sections. (Lumber, screws and components sold separately)
DOCK TOP RESIN 26.75X25.7X10.5 DOCK KIT ALUMINUM 4X10 PLAYSTR
Ten 2' x 2' interlocking panels for a 4' x 10' dock section. Maintenance free with slip resistant surface. Use with Commercial Grade or Aluminum Dock Frame Kits. Contains everything needed to assemble a 4' x 10' aluminum dock frame. Sleek design is made with a strong tempered alloy. Lightweight and durable, each section weighs less than 200 lbs. Can be combined with Resin Dock Top for the quickest assembly. Available as stationary, roll in or floating. Support components sold separately.
   
 
1