Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > FUEL CANS & SUPPLIES
Choose a sub category:
UTILITY CANS FUEL TANK FILTERS FUEL CAN SPOUTS & ACCESSORIES
GAS CANS STORAGE CABINET - FLAMMABLES KEROSENE CANS
FUEL FLOW METERS FLUID PUMPS & ACCESSORIES FUEL TANKS
Sort By:
1 2 3
Victor 22-5-00782-8 Siphon Manual Transfer Pump CAN GAS EXTENSION FLEX        Goldenrod 470-5 Replacement Filter Element
Transfers fluid for everyday projects or in emergency situations. 5-foot PVC hose. Flexible extension made with high quality hose to not crack or split. Helpful fueling cars, trucks, boats and other hard to reach tanks. Use to replace element of No.495 (SKU 636-3667) standard fuel filter; will fit No.496 (636-4897) fuel filter.
Justrite 11202Y Funnel CAN GAS ASSEMBLY NOZZLE       Goldenrod 595-5 Replacement Filter Canister
For safe, leak-free pouring into smaller openings, the large rounded bowl attaches to a type 1 can quickly and provides protection from splashing and spillage. The two position hinged design allows filling or pouring from the can without removing the funnel, and takes up less space during storage. Durable polypropylene material. Replacement automatic stop nozzle assembly for No-Spill cans. Will not fit other cans. Fits all No-Spill cans produced since 2010. Replacement for No.595 (SKU 622.0990) spin-on fuel filter.
SPOUT KIT FOR OLD GAS CAN     SPOUT KIT FOR PLASTIC JUGS    Hopkins 50863 Water Can
Fuel jug spout and vent kit, only fits plastic cans. For use on portable fuel containers manufactured prior to January 1, 2009. Kit includes spout and cap, second cap for spout or can vent, 1/2" replacement push in vent, second base cap to fit additional cans and flame arrester. Replacement water jug spout and vent kit. Kit includes spout and cap, second cap for spout or can vent, 1/2" replacement push in vent, second base cap to fit additional cans and a filter screen. Made of durable, rust- and dent-proof, high-density polyethylene with convenient back and top handles for easier pouring. Self-venting spout. Dimensions: 14.25" x 8.50" x 18.5".
CAN GAS OLD HI-FLO SPOUT      HI-FLO KIT FOR PLASTIC JUGS   Goldenrod Water Block Replacement Filter Element
High flow fuel replacement spout and vent kit. For use on portable fuel containers manufactured prior to January 1, 2009. Kit contains spout and cap, 8" spout extension for hard to reach tanks, 1/2" replacement push in vent, second base cap to fit additional cans and a flame arrester. 7/8" opening, fast fueling for off road equipment, tractors, boats and more. High flow water replacement spout and vent kit. 7/8" opening, fits most old style water jugs and cans. Kit includes spout and cap, 8" spout extension for hard to reach tanks. 1/2" replacement push in vent and second base cap to fit additional cans. Removes water molecules from gasoline or diesel fuels with water-absorbing polymers that restrict fuel flow when its time to replace. Use to replace element of No.496 (636-4897) water-absorbing fuel filter, will fit No.495 (SKU 636-3667) fuel filter.
Goldenrod 596-5 Replacement Spin-On Filter Canister CAN GAS NO SPILL 1.25 GAL     Goldenrod 495-4 Replacement Filter Bowl
Replacement for No.596 Water-Block spin-on fuel filter. Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles on each can. Finger handles on each nozzle, and a finger slot on the bottom of each can (rear handle on the 5 gallon). The top handle is for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands. Replacement bowl for 495 and 496 fuel filters.
CAN GAS NO SPILL 2.5 GAL      CAN GAS NO SPILL 5 GAL        DIESEL GAS CAN 5 GAL YELLOW
Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles on each can. Finger handles on each nozzle, and a finger slot on the bottom of each can (rear handle on the 5 gallon). The top handle is for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands. Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles on each can. Finger handles on each nozzle, and a finger slot on the bottom of each can (rear handle on the 5 gallon). The top handle is for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands. Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles, finger handles on each nozzle, rear handle on the 5 gallon, top handle for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands.
CAN KEROSENE BLUE 5GAL        Fill-Rite FRHMN075S Manual Unleaded Fuel Nozzle Goldenrod 595 Spin-On Fuel Filter
Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles, finger handles on each nozzle, rear handle on the 5 gallon, top handle for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands. Compatible with gasoline and diesel. 3/4" manual nozzle for use with electric fuel pumps. UL/cUL Listed. For farm, construction, industrial, and service station use with gasoline, gasohol, diesel fuel and other fuels. Filters microscopic particles of rust, sand, dirt, scale, and lint. 426 square inches of filtration area. Up to 50 PSI and/or 25 GPM max recommended working conditions. Uses No.595-5 (SKU 622.1204) replacement cartridge.
Fill-Rite FRHMN100S Manual Fuel Nozzle Lubrimatic 55-017 Barrel Hand Pump Justrite 7120100 Type I Safety Can
For a broad range of high flow fueling applications from farm tractors and combines, heavy earth-moving equipment, fleet re-fueling, to above ground storage tanks and portable truck mounted fueling operations. 1" aluminum nozzle, 1" NPT outlet, manual nozzle. 50 PSI working pressure. Integral hanging hook compatible with all Fill-Rite products. Minimal spray pattern to reduce foaming. Viton seals and o-rings for smooth valve operation. Rated to -20 degrees F operation. Compatible with gasoline and diesel.  UL/cUL listed. Made in USA. Fits 30 or 55 gallon drums. Delivers 1-1/2 pints per 36" lift stroke. Rod style with steel piston and valves, no rubber packing or sleeves. Die-cast head with garden hose threads and 18-gauge steel cylinder. Includes curved metal spout and adapter. Pump outlet is threaded for 3/4" garden hose coupling. 2" bung nut included. Heavy-duty, high grade coated steel construction with reinforcing ribs to strengthen sidewalls to resist chemicals and stand up to heavy abuse. Single spout for filling and pouring. Self-closing, leak-proof lid, and a swinging handle for carrying heavier loads. Counterbalanced ergonomic design with full-fisted grip handle offers gravity-assisted pouring. All models are equipped with an FM-tested dual-density flame arrester, which dissipates heat to stop flashback ignition. Positive pressure relief mechanism automatically vents between 3 and 5 psig. Meets OSHA and NFPA requirements, is certified by FM, UL, ULC. Carb compliant, and TUV certified. Uses funnel 11202Y, Orgill sku 396.0424 for type 1 cans.
Justrite 7110100 Type I Safety Can Fill-Rite SD11 Barrel Piston Hand Transfer Pump Justrite 7150100 Type I Safety Can
Made of galvanized steel with a tough powder paint finish, has ample headspace to accommodate oil additives. Protection features include a 3-1/2" long chemical resistant stainless steel flame arrester that stops flashback ignition, provides faster liquid flow, and offers exceptional durability. Self-venting, self-closing leakproof lid prevents ruptures from pressure build-up and controls vapors and spills. Warning label includes an extra large ID zone for user labeling of contents, or may be used to designate department or individual owner. 100 percent leak tested. Meets OSHA and NFPA. FM approved, UL/ULC listed, Carb compliant, T?V certified.  9-1/2" x 11". Uses funnel 11202Y, Orgill sku 3960424 for type 1 cans. Drum or barrel mounted lever action die cast and steel piston pump, up to 11 oz. per stroke. Adjustable packing nut. Nitrile rubber seals. Fits 1-1/2" and 2" bung openings. 1" diameter steel telescoping suction tube. Garden hose threads on spout for greater flexibility. Pumps diesel fuel, hydraulic and transmission fluids, and motor oils up to 40 weight. Steel telescoping suction tube to accommodate different drum and barrel heights Heavy-duty, high grade coated steel construction with reinforcing ribs to strengthen sidewalls to resist chemicals and stand up to heavy abuse. Single spout for filling and pouring. Self-closing, leak-proof lid, and a swinging handle for carrying heavier loads. Counterbalanced ergonomic design with full-fisted grip handle offers gravity-assisted pouring. All models are equipped with an FM-tested dual-density flame arrester, which dissipates heat to stop flashback ignition. Positive pressure relief mechanism automatically vents between 3 and 5 psig. Meets OSHA and NFPA requirements, is certified by FM, UL, ULC. Carb compliant, and TUV certified. Uses funnel 11202Y, Orgill sku 396.0424 for type 1 cans.
Fill-Rite FRTCB Vented Fuel Tank Cap with Base PUMP BARREL DEF BL FITS 5-55G Plews 30-108 Manual Transfer Pump with Viton O Rings
Powder-coated finish tank vent cap. Includes hole and tab for padlock security. Relieves dangerous vapor buildup and over expansion/contraction of the tank. Fits 5 to 55 gallon drums with standard bung. Polypropylene construction, stainless steel rods and Viton seals. Use for DEF (urea), mild acids, alcohol, mild alkalines, anti-freeze, diesel, gas, machine oil, petroleum, thinners and windshield washer fluid. Delivers 9 oz per stroke. For transferring from one container to another, or draining oils and other fluids. Hand-operated, self-priming. For farm, home, automotive, and factory use. Heavy-duty steel construction with durable Viton o-rings. 8' vinyl hose (0.50"ID x 0.63"OD) to handle up to 90-wt. fluids. Features a double check valve. 1-gallon/8 strokes.
   
 
1 2 3