Home > HEATING & COOLING > VENTING & FANS > DRYER VENTILATION > DRYER VENT HOODS
Sort By:
1
CAP EXHAUST BROWN 4IN         Lambro 2677B Hood/Face Lambro 2676W Dryer Vent Hood
CAP EXHAUST BROWN 4IN
Our Price: $2.19
Features a louver damper system that prevents cold air, snow or rain from entering the home. Redesigned to prevent them from sticking. Recessed caulk line to assist in a clean caulking application. UV resistant coating to prevent the cap from discoloring and are paintable. These caps can be used in conjunction with brick, concrete or siding. Includes face only. Includes face only.
Builders Best 110113 Dryer Vent Hood P-Tanium 110889 Dryer Vent Hood Lambro 267B Wall Mount Dryer Vent Hood
Thicker and more durable. 4" x 10.5" Fully assembled, riveted tailpipe, backdraft flapper. Wide mouth for excellent airflow. Durable through the wall hood. Fully assembled, riveted tailpipe, backdraft flapper. Standard mouth hood for good airflow. Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) ? 4"  plastic louvered vent with 11" tail pipe, (1) ? 4"  plastic trim plate.
Lambro 267W Wall Mount Dryer Vent Hood Lambro 344 Dryer Vent Hood Lambro 361W Dryer Vent Hood
Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) ? 4"  plastic louvered vent with 11" tail pipe, (1) ? 4"  plastic trim plate. Opening/closing ?damper prevents outside elements from entering the vent. (1) ? 4? Aluminum preferred hood vent with 11? tail pipe. (1) ? 4? White plastic trim plate. Includes hood only.
Lambro 224W Dryer Vent Hood Lambro 222W Dryer Vent Hood Lambro 222B Dryer Vent Hood
Plastic face with standard aluminum tailpiece. Plastic face with standard aluminum tailpiece. Plastic face with standard aluminum tailpiece.
Lambro 224B Dryer Vent Hood Builders Best 10155 Offset Elbow Lambro 209W Dryer Vent Hood with Standarad Tail Piece
Plastic face with standard aluminum tailpiece. Use when outlet pipe on dryer protrudes up to 2.5". Can also be used where wall outlet pipe protrudes and is too large for the wall offset elbow. 4" diameter fittings, aluminum. Turns 90 degrees within 4.5". Includes one male snap-lock fitting and one female rotating snap-lock fitting. Plastic face with standard aluminum tailpiece.
Lambro 370 Dryer Vent Hood with Damper
Galvanized vent hood with damper
   
 
1