Home > HEATING & COOLING > HEAT & AIR CONDITIONING > AIR FILTRATION
Choose a sub category:
FURNACE FILTERS - STANDARD PLEATED AIR FILTERS ELECTROSTATIC/ALLERGEN FILTERS
AIR FILTER AIR FRESHENERS ROOM AIR CONDITIONER FILTERS AIR PURIFICATION SYSTEMS
HUMIDIFIERS & ACCESSORIES DE-HUMIDIFIERS
Sort By:
1 2 3 ... 8
Protect Plus 114301 Air Filter Protect Plus 114141 Air Filter Protect Plus 120201 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Protect Plus 114201 Air Filter Protect Plus 112241 Air Filter Protect Plus 112201 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Protect Plus 114241 Air Filter Protect Plus 112121 Air Filter Protect Plus 116251 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Protect Plus 116201 Air Filter Protect Plus 115201 Air Filter Protect Plus 114251 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Protect Plus 110201 Air Filter Protect Plus 116241 Air Filter Protect Plus 112301 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Protect Plus 115251 Air Filter Protect Plus 116161 Air Filter Protect Plus 118301 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Protect Plus 120251 Air Filter Protect Plus 118181 Air Filter Protect Plus 118201 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Protect Plus 118251 Air Filter Protect Plus FS1200022251 Air Filter Protect Plus 120241 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Protect Plus 118241 Air Filter Protect Plus 120301 Air Filter Protect Plus 124241 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
Protect Plus 116301 Air Filter Frost King F1524 Open Cell Air Filter Protect Plus 125251 Air Filter
?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900. Air Conditioner foam filter.  Removes dust and pollen from the air.  Washable and re-usable.  Can be cut to any size with ordinary scissors ?StrataDensity? - Double sided skin fiberglass panels are constructed of continuous filament fiberglass pads, with a skin on both the air entering and air leaving sides. No metal backing. High volume construction, consists of a 4-pieces design, using moisture resistant chipboard material that is pre-printed with graphics. Frames are bonded with hot melt adhesive to the media pad around the entire perimeter of both sides of the filter. Frames are kraft colored, with colored printing. UL Classified in accordance with UL 900.
   
 
1 2 3 ... 8