|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4" to 6" casing. Easy to use, snap-in wire guide; with split circle wire hole.
|
Individually packaged splicing kit. Certified lead-free. Heavy duty wall. Includes crimp connectors. Wire sizes: 3-wire 10-12-14. Sleeve size 3/8" x 3".
|
Compression sleeve for 3 wire. Wire sizes for 3 wire 10-12-14 submersible cable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits 1" or 1-1/4" Drop Pipe, Fits 4" to 8" well casing. Supplied with 2 stainless steel clamps.
|
Bulk pack.
|
1" insert rope adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simmons Male Insert Adapter, 1 in Drop Pipe, 0.3 lb Load Capacity, Red Brass
|
A53 galvanized grade B hot roll electric weld.
|
Simmons Male Insert Adapter, 1-1/4 in Drop Pipe, 0.5 lb Load Capacity, Red Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1" x 10" long tank cross, silicon bronze fabricated with copper pipe and male fitting, one 1/2" female tap in top of cross, 3/4" FIP x 1"MIP tapping on each leg.
|
Tank leg length 10", female tapping each leg 3/4", male tapping each leg 1", female tapping top of cross both 1/2", two female tappings on side 1/4".
|
Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-Ring. Vertical position indicator. Fits 5"-12" well casing with 1" drop pipe. Factory tested to 250 PSI. Supports 5,000 pounds. Certified Water Tight by the Water Systems Council Pitless Adapter Division.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes No.708 - long tank cross (bronze cast), 2" pressure gauge, 1/2" boiler drain, 1/4 x 3 brass nipple, 30-50 FSG-2 switch, and relief valve.
|
Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-Ring. Vertical position indicator. Fits 5"-12" well casing with 1" drop pipe. Factory tested to 250 PSI. Supports 5,000 pounds. Certified Water Tight by the Water Systems Council Pitless Adapter Division.
|
|
|
