|
|
|
|
|
|
|
|
|
|
|
|
|
|
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Produced in polypropylene and fitted with EPDM o-rings, more chemically resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.
|
High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk.
|
Produced in polypropylene and fitted with EPDM o-rings, more chemically resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
|
Use to install shutoff in straight pipe run. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
|
Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged
|
125 PSI WOG, Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes..
|
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
125 PSI WOG, Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G.
|
For hot or cold water In-line valve with PEX connections on both ends. Bar coded.
|
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes..
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
|
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
|
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hot or cold water In-line valve with PEX connections on both ends. Bar coded.
|
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged
|
ASGE 1061, PSF 61 approved, cUPC, IAPMO listed, NSF/ANSI 61, AB1953 compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic adapter stop valve. 1/4 OD x 3/8 Male Comp x 3/8 Female comp
|
Use to bypass flow to water heaters and softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
|
Use to install shutoff in supply line. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
|
Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
|
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
|
|
|
