Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATERS > WATER HEATER ACCESSORIES
Sort By:
1 2
Camco 9973 Quick Change Element Tool Camco 11260 Drain Pan With 1 in PVC Fitting Camco 10023 Water Heater Continuity Tester With Battery
Turn off electric change you element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Test your elements and thermostats while still in the water heater. 1 piece.
Camco 11460 Drain Pan With 1 in PVC Fitting Camco 11360 Drain Pan With 1 in PVC Fitting Camco 11400 Drain Pan With 1 in PVC Fitting
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Camco 11410 Drain Pan With 1 in PVC Fitting Camco 9953 Professional Element Socket Camco 20800 Drain Pan With 1 in PVC Fitting
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Fits standard 1/2" socket drive to replace screw-in water heater elements. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Camco 11420 Drain Pan With 1 in PVC Fitting Camco 20840 Drain Pan With 1 in PVC Fitting Camco 20830 Drain Pan With 1 in PVC Fitting
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Quick Strap QS-50 Water Heater Strap Rheem / Richmond RP20063 Water Heater Gasket Kit DRAIN PAN WASHMACH WHITE W/PVC
A double body strap water heater restraint system for water heaters up to 80 gallons in size. Seismic/earth quake support system. Includes (4) straps, (4) J-clips, (4) 3/8" carriage bolts, and (2) 3/8" hex nuts. System allows for full adjustment from the front side of the water heater. Made of 24 gage CRS, galvanized material. California Division State Architect (DSA) approval #97-010. IAPMO listed. City of Los Angeles approved #RR5465. Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part. For front-loading machines. High impact white polypropylene. 31" x 35" OD and 29" x 33"ID. 1-1/2" PVC drain.
Camco 20810 Drain Pan With 1 in PVC Fitting Rheem / Richmond RP20064 Thermocoupler-Gasket Kits Thermwell SP57/11C Insulation Blanket
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: 24" thermocouple, burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part. 3" x 48" x 75" vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gallon tank, plastic tape. For gas, oil or electric water heaters.
Quick R B5-69 Water Heater Insulation Jacket M-D 04663 Water Heater Insulation Blanket Plumb Pak PP888-12LF Water Heater Connector
Reduces heat loss from water tank. R value equals 6.7. Will insulate up to a 60 gallon tank. 2" x 48" x 75" blanket per bag. White vinyl backed fiberglass blanket. Designed for gas, oil or electric heaters. Fits up to 60 gallons. Includes adhesive tape for easy installation. Bagged. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 24 in Length, Stainless Steel
Camco 20850 Drain Pan With 1 in PVC Fitting Camco 20860 Drain Pan With 1 in PVC Fitting Quick Strap QS-50-D Water Heater Strap
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. A double-body strap water heater restraint kit for water heaters up to 80 gallons in size. Seismic/earth quake support system. Includes (4) straps, (4) J-clips, (4) 3/8" carriage bolts, (2) caps, and (2) 3/8" hex nuts. System allows for full adjustment from the front side of the water heater. Made of 24 gage CRS, galvanized material, with a protective "non-scratch" painted coating and protective safety cap. California Division State Architect (DSA) approval #97-010. IAPMO listed. City of Los Angeles approved #RR5465.
DRAIN PAN W/H 32IN ID ALUMINUM Eastman 60022/DET-5 Thermal Expansion Tank Hubbard QS-120 Water Heater Straps. 120 Gal
Aluminum pan for gas or electric water heaters, 32" internal diameter, will not rust or crack, PVC fitting included. Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar). A double-body strap water heater restraint kit for water heaters up to 120 gallons in size. Seismic/earth quake support system. Includes (4)straps, (4) J-clips, (4) 3/8? carriage bolts, (2) caps, and (2) 3/8? hex nuts. System allows for full adjustment from the front side of the water heater. Made of 24 gage CRS, galvanized material. California Division State Architect (DSA) approval #97-010. IAPMO listed. City of Los Angeles approved #RR5465.
DRAIN PAN TANKLESS W/PVC FITNG Camco 11231 Water Heater Stand Kit Eastman 60023/DET-12 Thermal Expansion Tank
Includes 1" and 1-1/2" dual size PVC drain fitting. Injection molded for superior strength. Will not rust or corrode. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2".Protect finished areas from water damage. Stand for gas water heaters from 30 to 50 gallons, constructed of galvanized steel, minimal assembly required, for use with all residential water heaters.  21" x 21" x 18" Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar).
   
 
1 2