Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR > TUB & SHOWER DRAINS/PARTS
Sort By:
1 2 3 4
Oatey 43561 Snap-In Floor Drain Plumb Pak PP826-22 Waste Shoe Washer Danco 37680B Bath Drain Gasket
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Washer for 1-1/2" bath waste strainer. Rubber washer for Toe Touch drain assembly.
GASKET TUB DRAIN CARTRIDGE    Oatey 42042 Tile Rings COVER DRAIN CLIP SHOWER3-3/8IN
Rubber. For tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4". 4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains. Designed to fit 3-3/8" shower drains.
Plumb Pak PP863-11 Drain Washer Oatey 43565 Snap-In Floor Drain STRAINER TUB SNAP 2IN CHROME
Rubber washer for Foot Lok Stop assembly. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Steel construction, 2" diameter. Grid-style.
Screw-Tite 42358 Replacement Strainer Oatey 43569 Snap-In Floor Drain Plumb Pak PP826-64 Strainer Dome Cover
For screw-on tile shower drains, 4" snap-in drains and 2" or 3" general purpose drains. Replacement for Oatey 42210, 42213, 42399, 42404, 42218, 42219, 43566, 43567, 43580, 43581, 43578, 43579. Bagged. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Strainer dome cover with screw.
Plumb Pak PP826-4 Flat Tub Overflow Washer Plumb Pak PP22612 Face Plate Screw STRAINER SHOWER 3-3/8IN CHROME
Plumb Pak Tub Overflow Washer, Flat, Sponge Chrome plated face plate screws. Steel construction, use with 3-1/8" drains. Screws not included.
PLATE OVERFLOW 1-HOLE CHROME  Plumb Pak PP825-50 Shower Drain Grid BASKET SHOWER HAIR CATCHER
Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included. 3-5/16" O.D. 6.88" h x 4-3/4" w. Durable plastic construction. Designed to fit the Danco hair catcher for shower drains (Model #?s: 10533, 10529). Stops hair and other particles from going down the drain
SHOWER DRAIN 4-1/4 SNAP IN SS B & K 133-106 Shower Drain Oatey 42787 Shower Drain
4-1/4". Fits cast iron, plastic an clay tile pipes, prongs can be adjusted to fit drain. For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Danco 10533 Drain Stopper Plumb Pak PP606-23 Clevis Plunger Linkage Assembly World Wide Sourcing 24354 Bath Drain Trip Levers
Prevents clogged shower drains by catching hair and debris before they go down the drain. Removable basket for easy cleaning. Universal fit, fits any standard 4" shower drain. Easy installation. For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. Zinc body. Screws included.
DRAIN STOPPER RAPIDFIT CHROME Plumb Pak PP863-50 Replacement Tip Toe Cartridge Danco 10529 Shower Drain
Plastic. Touch-toe design, Threaded shaft. Prevents clogged shower drains by catching hair and debris before they go down the drain. Removable basket for easy cleaning. Universal fit, fits any standard 4" shower drain. Easy installation.
Plumb Pak PP826-10 1-Hole Trip lever Style Tub Face Plate Oatey 42097 101 PS Shower Drain Oatey 101 PNC Shower Drain
Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Chrome Plated Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced.
   
 
1 2 3 4