Home > ELECTRICAL > SPECIALTY ELECTRICAL > AUDIO & VIDEO SUPPLIES > TV WIRE/CABLE FITTINGS
Sort By:
1 2
Cooper 1172V Type F Wall Jack Cooper 1172W Type F Wall Jack Gardner Bender F GDC-FAM Coaxial Connector
For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included. For use with cable ready TV's, VCR's and outdoor antennas. For use with 75 ohm cable. Self-extinguishing, high impact thermoplastic meets UL 94V-O flame retardancy rating. Mounting and assembly hardware included. Combine two RG-6 lengths of coaxial cable or connect cables through a wall.
Zenith VA1002RG6CR Type F Coaxial Connector Zenith VA1002RG6FT Type F Coaxial Connector Zenith VA1002RG6TW Type F Coaxial Connector
Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth. Connects two coaxial cables. .75" height x .5" width x .5" depth. Connects to coax cable without tools. .75" height x .5" width x .5" depth.
American Tack and Hdwe VM1002RG6BU Zenith Coaxial Bushings Zenith VA1001RG6QP Type F Coaxial Adapter Zenith VA1001RG6RA Type F Coaxial Connector
Allows coax cable to feed through wall an internal or external wall. 1.17" height x 1.17" width x 1.17" depth. Allows quick connect and disconnect of coax cable. .87" height x .5" width x .5" depth. For use in hard to reach spaces. Repositions cable jack for easy access. Plug and play. .87" height x .67" width x .37" depth.
CONN COAX CRIMP WTHRPROOF RG6 Gardner Bender PEC-31525 Coaxial Cable Clamp Zenith VS1001SP2W 2-Way Coaxial Splitter
Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth. Secures RG-59, RG-6 coaxial. Combo screw for safer installs. Screw-in depth of 1/2". Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into two. 1.25" height x 2" width x 0.5" depth.
Zenith VW1001WJ2W Dual Type F Wall Jack Zenith VA1010RG6TW Type F Coaxial Connector American Tack and Hdwe VR1001SW2W Zenith A/B Switches
Connects two 75 ohm coax cables through a wall. 4.5" height x 2.75" width x 0.75" depth. Connects to coax cable without tools. .75" height x .5" width x .5" depth. Manually switch between two coax input sources to one TV such as antenna or cable. 2.37" height x 2.87" width x 0.75" depth.
Zenith VW1001WJ1A Type F Wall Jack Zenith VW1001WJ1W Type F Wall Jack Gardner Bender F GDC-6CM Compression Connector
Connects 75 ohm coax cable through a wall. 4.5" height x 2.75" width x 0.75" depth. Connects 75 ohm coax cable through a wall. 4.5" height x 2.75" width x 0.75" depth. For use with RG-6/Quad coaxial cable. Nickel plated to resist corrosion. Requires crimping tool to use.
Zenith VS1001SP3W 3-Way Coaxial Splitter Zenith VS1001SP4W 4-Way Coaxial Splitter Zenith VA1010RG6CR Type F Coaxial Connector
Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into three. 1.75" height x 2.75" width x 0.5" depth. Gold plated, 75 ohm, 1000Hz. Splits one coax cable signal into four. 1.75" height x 2.75" width x 0.5" depth. Connects to RG6 coax cable. Crimping tool required. .87" height x .5" width x .5" depth.
Zenith VS3001SP2W 2-Way Coaxial Splitter WALLPLATE HDMI/COAX           Gardner Bender GDC-3W2G 3-Way Satellite/Digital TV Splitter
WALLPLATE HDMI/COAX
Our Price: $8.99
Splits one coax cable signal into two. 24K gold connectors. 5-2400MHz. 2" height x 2" width x 0.75" depth. Connects cables through a wall. The flush mount design ensures an organized and professional look. Screws are included for mounting. PCB printed circuit board design, nickel plated housing. 5 MHz - 1 GHz bandwidth, 75 Ohm impedance, low insertion loss, over 120 dB of RFI shielding. Splits one signal into three.
Gardner Bender F ITC-RG-6 Tool-Less Connector WALLPLATE DUAL JACK/HDMI WHITE Zenith VS3001SP4W 4-Way Coaxial Splitter
Strip the cable, fold braid back and push into ITC connector. Connects cables through a wall. The flush mount design ensures an organized and professional look. Screws are included for mounting. Splits one coax cable signal into four. 24K gold connectors. Quad Shield video accessory. Four layers of premium shielding to prevent signal interference. 5-2400MHz. 2" height x 3" width x 0.75" depth.
Gardner Bender F ITC-RG-6C Tool-Less Connector Gardner Bender F GDC-6C Compression Connector Leviton M02-40830-00W Speaker Jack
Strip the cable, fold braid back and push into ITC connector. For use with RG-6/Quad coaxial cable. Nickel plated to resist corrosion. Requires crimping tool to use. For home audio/video systems including VCR, cable TV, satellite systems and connection of other TVs. Use shielded audio/video cable in a single or dual gang wallplate. Connector modules snap into QuickPort wallplates. Connections are simple without messy soldering. Gold plated for improved performance. UL listed.
   
 
1 2