Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL CONNECTORS > CABLE STAPLES
Sort By:
1 2 3
Gardner Bender GSE-15310 Service Entrance Staple Gardner Bender GSE Insulated Service Entrance Staple Gardner Bender MSB Insulated Low Voltage Cable Staple
Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing. Polyethylene plastic insulated staples are stabilized against UV rays and extreme cold; withstand deterioration and breakage to secure number 6 SER service entrance cable. Electro-zinc plated nails for strength and durability. Card/5. U-shaped staple fastens audio speaker and bell wire, insulated cradle protects wire.
Gardner Bender MSW Insulated Cable Staple Gardner Bender GSE-15410 Service Entrance Staple Gardner Bender MSI-50B Insulated Cable Staple
U-shaped staple fastens audio speaker and bell wire, insulated cradle protects wire. Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing. Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation.
Gardner Bender MS-1575T Cable Staple Snap-Pak 122652 Insulated Staple Gardner Bender PSG Low Voltage Cable Staple
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Used to secure low voltage wiring or coaxial cable. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage.
Gardner Bender MSI-1525T Insulated Cable Staple Gardner Bender MS-1550T Cable Staple Gardner Bender MDI Insulated High Impact Cable Staple
Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Insulated staples protect and secure Romex, NM, BX and UF. PVC insulation protects cable from damage due to mis-hit and overdriving, prevents a short circuit if wire insulation is damaged. Highly visible color coded for size and application. Card/40.
Gardner Bender PWS Low Voltage Kwik Mount Cable Staple Gardner Bender PSB Cable Staple STAPLE METAL INSULATED 1/2IN
Quick fastening and guiding of wires. Wires easily snap in or out of two usable sides. Use to secure Christmas light sets, sound system wires, etc. Holds category 5 cable for datacom. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed. Metal insulated staples secures and protects non-metallic (NM), BX, MC, AC and UF cable. Insulator made from durable polyethylene. Plastic insulator protects cables and helps prevent arc faults. Dimensions: 1/2"W x 1-1/2"L. Silver/red color.
Gardner Bender PSB Low Voltage Cable Staple Gardner Bender PS-50 Insulated Cable Staple Gardner Bender PMB-1525 Low Voltage Cable Strap
For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed.
Gardner Bender PSW-1650T Cable Staple Gardner Bender PCC Low Voltage Clip-On Cable Staple Gardner Bender PCS-1600T Low Voltage Masonry Staple
For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. Used for indoor and outdoor applications. UV resistant polyethylene saddle. Zinc plated nails. Secures RG-49, RG-59 and RG-6 coaxial cables. With clip-on feature. Hardened nails can penetrate cement block, mortar or plaster surfaces. For cable TV and other hard-surface installation. Plastic cradle provides added protection to cable jackets. Freeze resistant. UV protected. (Black). Secures RG-49, RG-59 and RG-6 coaxial cables. PCS-1600 has clip-on feature.
GB-Gardner Bender MSI-1575 Cable Staples GB PTP-25T Category 3 and 5 Low Voltage Data Staple Gardner Bender PS-1550T Insulated Cable Staple
Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation. GB Data Staple, Category 3 and 5, Low Voltage, 1/4 in Crown, Polyethylene, Zinc Plated, Blue, Suitable For Use With: RJ-11, RJ-12, RJ-45, Category 3 and Category 5 Wire to Wood, 1/4 in Width, For Mounting to Wood Surfaces For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening.
Gardner Bender PSW Low Voltage Cable Staple Gardner Bender MS-1555 Cable Staple Gardner Bender PS-1575T2 Insulated Cable Staple
For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening.
King 70112 Insulated Cable Staple Gardner Bender MS Cable Staple Gardner Bender MS Cable Staple
Made of 12 gauge carbon steel, insulated with high-impact, hot-melt PVC bonded to the top of the staple, tumble deburred and with rust inhibitor applied. Reduces risk of electrical fire and prevents a short circuit if the insulation is cut. Color coded for size and application and highly visible. Used with BX or Romex 3 conductor, #14, #12, and #10 WG or 2 stacked oval Romex #14 and #12 WG. Rated for up to 2500 volt. Dielectric rating per ETL Test 525777. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
   
 
1 2 3