Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > GROUNDING RODS/CLAMPS
Sort By:
1 2
Halex 16010B Ground Clamp Gardner Bender GGS-1512R Ground Screw Halex 93591 Ground Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Green round washer head screw for switch and outlet boxes. Connects grounding wire to the grounding rod.
Eritech CP58 Acorn Standard Duty Ground Clamp Eritech ZWP1J Grounding Pipe Clamp Gardner Bender GGP-1502 Grounding Pigtail
Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod. AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal.
Gardner Bender GGC-1508 Ground Clip Fishock GRC-FS Ground Clamp Gardner Bender 14-GRC Ground Clamp
For aluminum or copper grounding wire zinc plated. Helps to make a superior connection of ground wire to ground rod. Heavy duty construction for long usage. Connects grounding wire to the grounding rod.
Halex 36010 Ground Clamp Eritech CWP1J Grounding Pipe Clamp Halex 93592 Ground Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. Connects grounding wire to the grounding rod.
Halex 36110 Ground Clamp Halex 36019 Ground Clamp Square D PK7GTACP Ground Bar Kits
Indoor or outdoor. Wire size fits number 8 - number 4 AWG. Use to secure the grounding wire to a 1/2" through 1" pipe. Bronze, bagged. UL Listed. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Eritech CWP1JU Grounding Pipe Clamp Halex 63299 Ground Screw Schneider PK9GTACP Ground Bar Kit
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed. Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Square D PK12GTACP Ground Bar Kits Cutler-Hammer GBK10P Ground Bar Kits Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
Eritech EK17 Direct Burial Perpendicular Ground Clamp Eritech EK16 Direct Burial Ground Clamp Halex 36020 Ground Clamp
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Wire size fits #10 - #2 AWG. Use to secure the grounding wire to a 1-1/4" - 2" or 2-1/2" - 4" pipe. Bronze. UL Listed.
Cutler-Hammer GBK14P Ground Bar Kits Square D PK23GTACP Ground Bar Kits Eritech 615840UPC Grounding Rod
Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1.
Erico 815860UPC Grounding Rods Square D PK15GTACP Ground Bar Kits Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
   
 
1 2