Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS
Choose a sub category:
METAL CONDUIT FITTINGS PVC CONDUIT FITTINGS SERVICE ENTRANCE FITTINGS
GROUNDING RODS/CLAMPS PLASTIC FLEXIBLE FITTINGS CONDUIT STRAPS
WASHERS / REDUCERS METAL CONDUIT SUPPORT BX / FLEX CONDUIT FITTINGS
METAL CONDUIT ACCESSORIES
Sort By:
1 2 3 ... 22
Halex 61505B 1-Hole Snap-On Cable Strap Halex 61507B 1-Hole Snap-On Cable Strap 1/2IN RGD CONDUIT LOCKNUT
Indoor or outdoor applications. To support EMT conduit. Indoor or outdoor applications. To support EMT conduit. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
1/2IN PLAST INSULATING BUSHING 3/4IN PLAST INSULATING BUSHING Carlon E940D-CTN Standard Conduit Coupling
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
3/4IN RGD CONDUIT LOCKNUT Halex 71205B 2-Hole Conduit Strap Carlon E940E-CTN/CAR Standard Conduit Coupling
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942DR-CTN Conduit Adapter Carlon E943D-CTN Terminal Adapter Halex 71207B 2-Hole Conduit Strap
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 75105B Hit Lock Cable Connectors 1IN RIGID STL CONDUIT LOCKNUT Carlon E942ER-CTN Conduit Adapter
Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
1/2IN KNOCKOUT SEAL BULK 1IN PLAST INSULATING BUSHING 3/8 NM/SE CLAMP CONNECTOR
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, me
Halex 61612B 2-Hole Snap-On Conduit Strap Halex 67800B Conduit Hanger Carlon E940FR-CTN Standard Conduit Coupling
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E943E-CTN Terminal Adapter 1/2 RIGID CONDUIT LOCKNUT 1/2 PLAST INSULATED BUSHING
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
3/4 PLAST INSULATED BUSHING 3/4IN KNOCKOUT SEAL BULK Raco 1370 Reducing Washer
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Used to reduce the size of the conduit hole opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. All steel construction. Zinc electro plated for corrosion protection.
Halex 71210B 2-Hole Conduit Strap 3/8IN FLEX/BX CABLE CONNECTOR 1/2" EMT SET SCREW CONNECTOR
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
   
 
1 2 3 ... 22