Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES > LIGHTING - RECESSED
Sort By:
1 2 3 4
Powerzone 30000-3L Recessed Light Bar Hanger Powerzone TM5 Open Recessed Light Fixture Trim Powerzone TM9 Open Recessed Light Trim
Two piece hanger bar for 24" maximum joist spacing. Made of steel with a galvanized finish. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings.
Powerzone TM12 Open Recessed Light Trim Powerzone TM2 Open Baffle Trim Powerzone TM3 Open Baffle Trim
Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM6 Open Baffle Trim Halo 301P Open Recessed Light Trim Halo H7ICT Recessed Housing
Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved. For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
Powerzone 5000BIC3L Recessed Light Fixture Halo 401P Open Recessed Light Trim Halo H7ICAT Recessed Housing
IC housing for direct insulation contact; new construction applications. Prewired for ease of installation. Installation instructions and templates included. 6" downlight. Built in thermal protection. UL Listed for damp locations. cULus Listed. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
Powerzone TRIM201-BK (MTM2) Baffle Trim FIXT RCSD CEIL WH SF RING     Halo H5ICAT Recessed Housing
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Recessed ceiling light. Tapered baffle. Minimizes glare and reduces ceiling brightness. The baffles narrow the focus of the down lighting beam and many are used with reflector lamps. Contoured tapered sides of coilex baffle for use with reflector lamps. Coil spring retention. Self-flanged trim ring sized to hide gaps caused by construction tolerances. Compatible with halogen, incandescent, LED or CFL lamps. For installations where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-3/8" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
Powerzone TRIM201-WH (MTM1) Baffle Trim Halo 300P Open Recessed Light Trim Powerzone 5000A3L Recessed Light Fixture
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Open recessed  trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved. Airtight IC housing for direct insulation contact; new construction applications. Prewired for ease of installation. Hanger bar included. 6" downlight. Built in thermal protection. Installation instructions and templates enclosed. UL Listed for damp locations. cULus Listed.
Halo 70PS Recessed Light Shower Trim Coilex Halo 310W Baffle Trim Halo 5000P Open Splay Trim
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved. Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
Coilex Halo 310P Baffle Trim TRIM FIXT FULL BFFL WH/BLK 6IN Powerzone TRIM205-BN (MTM5) Eyeball Recessed Light Trim
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. Black baffle and white trim. 6" baffles. Torsion spring retention. Socket supporting baffle. Slightly oversized ring expands coverage of ceiling cut-out errors. For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included).
Halo H750ICAT Recessed Housing Halo H5RT Remodel Recessed Housing Powerzone 5000R-6-3L Recessed Light Fixture
For use with Halo H7 LED 600 Series and 900 Series LED modules. Rated for direct contact with air-permeable insulation in insulated ceilings, may also be used in non insulated ceilings. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Rated for 15 watts maximum. 10-1/2" length x 7-1/2" width x 7-1/2" height with 1/2" plaster lip. Ceiling cutout: 6-1/2". Housing will slip through 5-1/2" ceiling opening, integral flange secures fixture against ceiling. Can be installed below the ceiling. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector deactivates fixture if an incorrect lamp is used or if ceiling insulation material is not applied correctly. Porcelain socket with nickel plated brass screw shell snaps into trim for consistent lamp positioning. Three "Quick Connect" connectors eliminate need for separate wire nuts, strip supply wires and push in. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts. Four remodel clips secure housing and accommodate ceiling thickness from 1/2" to 5/8". Housing accepts halo 5" trims. Listings: UL Damp Locations. UL Feed Through. IP Rated. Non-IC housing not for direct insulation contact; remodeling applications. Prewired for ease of installation. 6" downlight. UL Listed for damp locations. cULus Listed.
Halo H7 Recessed Housing Powerzone TRIM205-WH (MTM4 Eyeball Recessed Light Trim Halo H750RICAT Remodel Recessed Housing
For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp posting. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span and can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated. For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum housing. Installs from below the ceiling in 1/2" or 5/8" ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13-1/4" length x 6-7/8" width x 7-1/2" height. Ceiling cutout: Match template supplied with housing - 6-1/4" typical.
   
 
1 2 3 4