Home > PAINT & SUNDRIES > SUNDRIES > TILE PRODUCTS > MORTAR
Sort By:
1
CustomBlend CBTSG50 Standard Thin?Set?Mortar CustomBlend CBTSW50 Standard Thin?Set?Mortar Versabond MTSG25 Fortified Thin-Set Mortar
Economical blend. Recommended for floor installations. Good for setting Saltillo and other similar clay pavers.  Mix with custom additives, for increased performance. Meets ANSI A118.1 without additives. Meets ANSI A118.4 and ANSI A118.11 when mixed with Acrylic Mortar Admix. High performance unmodified mortar for most basic tile jobs. Premium quality and economy. Ultra smooth and creamy. Exceeds ANSI A118.1 without additives and Exceeds ANSI A118.4 and ANSI A118.11 when mixed with AMA or CustomFlex. 20 percent greater coverage. Use on vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement; brick and mini-brick, precast terrazzo; natural stone tile; and impervious porcelain tile, glass mosaics. Covers 85 - 95 sq. ft. (7.9 - 8.4 sq m) per 50 lbs (22.68 kg). applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Economical blend. Recommended for floor installations. Good for setting Saltillo and other similar clay pavers.  Mix with custom additives, for increased performance. Meets ANSI A118.1 without additives. Meets ANSI A118.4 and ANSI A118.11 when mixed with Acrylic Mortar Admix. High performance unmodified mortar for most basic tile jobs. Premium quality and economy. Ultra smooth and creamy. Exceeds ANSI A118.1 without additives and Exceeds ANSI A118.4 and ANSI A118.11 when mixed with AMA or CustomFlex. 20 percent greater coverage. Use on vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement; brick and mini-brick, precast terrazzo; natural stone tile; and impervious porcelain tile, glass mosaics. Covers 85 - 95 sq. ft. (7.9 - 8.4 sq m) per 50 lbs (22.68 kg). applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
Versabond MTSG50 Fortified Thin-Set Mortar Henry 425 Tileflex Thin-Set Mortar SpeedSet SDS25 Fortified Thin?Set?Mortar
Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Portland cement-based polymer modified. For the installation of quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior absorbent concrete surfaces. Covers 70 to 80 sq. ft. per 40 lbs. bag with 1/4" x 1/4" x 1/4" square notched trowel. Polymer-modified mortar for time-critical installations such as restaurants, malls and hotel lobbies. Excellent for cold temperature installations. Grout in 2 hours, traffic in 6. Protected by MoldGard Technology  to resist mold and mildew growth. Tile Types: Vitreous, semi-vitreous or absorptive tile: ceramic, mosaic, quarry, cement. Impervious porcelain and glass tile, brick and mini-brick, precast terrazzo, natural stone tile. Substrates: Concrete, mortar beds, masonry, Portland cement plaster, gypsum wallboard, cement backerboards, exterior grade plywood, existing ceramic tile, sheet vinyl flooring, VCT, plastic laminates, cutback adhesive.
Versabond MTSW50 Fortified Thin-Set Mortar Henry 527 Tileflex Plus Flexible Thin-Set Mortar Henry 527 Tileflex Plus Flexible Thin-Set Mortar
Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs. Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs.
Henry 425 Tileflex Thin-Set Mortar Henry H-549 FeatherFinish Underlayment Patch and Skimcoat SimpleSet CTTSG1-2 Pre?Mixed Thin?Set?Mortar
Portland cement-based polymer modified. For the installation of quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior absorbent concrete surfaces. Covers 70 to 80 sq. ft. per 40 lbs. bag with 1/4" x 1/4" x 1/4" square notched trowel. Portland cement-based patch that can be installed over almost any surface to provide a smooth permanent finish prior to the installation of floor coverings. Dries in 15 minutes, allowing for fast repairs and installations. Covers 198 sq. ft. at a skimcoat. Bonds ceramic tile up to 18" x 18". For interior wall and floor installations. Exceeds ANSI A136 Type I. Covers 20 to 50 sq. ft. depending upon the size of trowel and tile.
VersaBond?Flex VBFG50 All Purpose Fortified Thin?Set?Mortar Henry 348 Tileflex CeMastic Tile Setting Adhesive SimpleSet STTSW1-2 Pre?Mixed Thin?Set?Mortar
Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Use for setting all types of tile. Use over any surface such as floors, walls and countertops. Dries fast. Strength of a thin set mortar, ease of use of a mastic. Water resistant. Yields over one gallon of adhesive. Covers 60 sq. ft. per 7.5 lb. box when applied with a 5/32"D x 3/16"W V-notched trowel for setting floor and wall tile up to 8" x 8". Over 8" x 8" with a 1/4" x 1/4" x 1/4" square notched trowel covers 25 sq. ft. per 7.5 lb. box. Bonds porcelain, stone, marble, granite and ceramic tile up to 18" x 18". For interior wall and floor installations. Exceeds ANSI A136.1 Type I. Covers 20 to 50 sq. ft. depending upon the size of trowel and tile.
Custom Building AMA2 Thin-Set Mortar Adhesive Mix Henry 527 Tileflex Plus Flexible Thin-Set Mortar VersaBond?Flex VBFW50 All Purpose Fortified Thin?Set?Mortar
Mix with custom standard thin-set mortars. Increases bond strength and performance. Improves water resistance. Designed to be used in place of water to increase performance and bond strength of PremiumPlus, CustomBlend and Wall Tile Thin-set Mortars, non-polymer modified grouts or Portland cement mortar mixes. Adds water resistance and improves shock absorption. Meets ANSI A118.4 and A118.11 installation requirements. Use on interior and exterior floors, walls, countertops. For coverage refer to individual Custom Thin-Set Mortars. Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
Custom Building MGMM50 Medium Bed Mortar FlexBond FB50 Crack?Prevention?Mortar SimpleSet CTTSG3 Pre?Mixed Thin?Set?Mortar
For small to large format natural stone, ceramic or porcelain tile 15" x 15" or larger, clay pavers or other thin or medium bed applications. Non-slumping formula that eliminates lippage and minimizes leveling requirements. Can be applied for horizontal applications as thick as 3/4" or for thin bed applications to 1/4". Covers 35-100 sq ft. per 50 lb bag. Coverage depends upon trowel size. Exceeds ANSI A118.1, A118.4, and A118.11. Premium quality, polymer-modified mortar with outstanding flexibility and bond strength. FlexBond is exceptional for tiling over difficult-to-bond surfaces and for setting impervious porcelain or glass tile. Isolates cracks up to 1/16? and withstands minor substrate deflection. Protected by MoldGard Technology to resist mold and mildew growth. Tile Types: Vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement. Impervious porcelain and glass tile, brick and mini-brick, precast terrazzo, natural stone tile. Substrates: Concrete, mortar beds, masonry, Portland cement plaster, gypsum wallboard, cement backerboards, exterior grade plywood, existing ceramic tile, sheet vinyl flooring, VCT, plastic laminates, cutback adhesive. Bonds ceramic tile up to 18" x 18". For interior wall and floor installations. Exceeds ANSI A136 Type I. Covers 20 to 50 sq. ft. depending upon the size of trowel and tile.
   
 
1