Home > PAINT & SUNDRIES > SUNDRIES > LADDERS > PLATFORM & SCAFFOLDING
Sort By:
1 2
SPRING CLIP GREY 3IN          LOCK PIG TAIL                 LOCK ARM SCAFFOLD 13IN
SPRING CLIP GREY 3IN
Our Price: $2.99
LOCK PIG TAIL
Our Price: $3.79
LOCK ARM SCAFFOLD 13IN
Our Price: $5.99
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold MetalTech coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in. For exterior scaffolding. Meets ANSI, CSA and OSHA standards.1-1/2 x 3 in Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
Qualcraft 2501 Roofing Brackets Qualcraft 2502 Roofing Brackets Qualcraft 2500 Roofing Brackets
Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified. Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified. Durable all steel construction with 10" platform. 10" to fit pitch on most roofs. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 10" planks.
Qualcraft 2504 Roofing Brackets Qualcraft 2503 Roofing Brackets GUARDRAIL 5FT
GUARDRAIL 5FT
Our Price: $15.99
Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified. Durable all steel construction with 6" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks. Meets ANSI, CSA and OSHA standards.
Mintcraft Pro YH-CS001 Casters JACK ADJ LEVELLING GALV 24IN  GUARDRAIL POST W/WEDGE CLAMP
For Sku# 879.5478 scaffold. 5" Dia. x 1-1/4" W. Rubber wheel. Pin not included. 303 lb. load capacity. With plate (hollow). Meets ANSI, CSA and OSHA. Meets ANSI, CSA and OSHA standards.
QualCraft 2201 Pump Jack Brace CASTER SCAFFOLDING 500LB 8IN  TRAY BAKER TOOL
TRAY BAKER TOOL
Our Price: $34.99
Used as bracing for wood poles. Pole should be constructed in accordance with operating instructions. 8 in wheel enables to easily move scaffolding and locks into place for stability and reliability. Secure and safe, use with standard or arch frame. Caster wheels have a 3.88 in Height stem, they do not clamp. Use with locking pin or pigtail lock. For use with I-CISC and I-CISCPY scaffolds. Black polypropylene. 30.25 x 20 x 2.75 in.
BRACE SCAFFOLD CROSS 7X4FTX1IN BRACKET SIDE 20IN             Qualcraft 2210 Pump Jack Pole Anchor
BRACKET SIDE 20IN
Our Price: $44.99
Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in. O.D. galvanized steel tube, 16 ga. Weather Resistant. Meets ANSI, OSHA and CSA standard. Meets ANSI, CSA and OSHA standards. Provides additional margin of safety and security when used according to instructions with light duty scaffolding system.
Werner AP Portable Type II Work Platform FRAME SCAFFOLD 60X60IN        QualCraft 2420 2-Rung Short Body Ladder Jack
FRAME SCAFFOLD 60X60IN
Our Price: $67.99
Non-marring feet provide slip-resistance and protect floor from damage. Provides a non-skid area for standing. Lightweight, easy to carry and set up. Convenient to store. Work comfortably along walls and windows. Ideal for painting. Dimensions: 39-1/2" x 12" top; 20-9/16" highest standing level. 41"H x 16-5/8"W x 35-3/4"D. Powder coated. Flip locking system. Includes coupling pins and spring-locks. Gravity-lock frame lock. 48in lock spacing. Interior tubes: outside diameter 1 in. - 16 gauge. Perimeter tubes: outside diameter 1.625 in. - 13 gauge. Meets ANSI and OSHA Standards. MIG welded and riveted construction. Will work on either inside or outside ladder face. Will accommodate up to 18" wide-plank. Adjustable to fit round or D-Rung ladders. Complies with OSHA requirements.
OUTRIGGER EXT 32IN            Mintcraft Pro YH-TR001-2 Outrigger Qualcraft 2200 Pump Jacks
OUTRIGGER EXT 32IN
Our Price: $72.99
Use to provide additional stability for higher elevations. High performance steel and heavy duty welds for a solid and secure footing. Use with any standard or arched scaffold frames. Blue anti-slip baked on powder coated textured finish for maximum corrosion resistance. Meets OSHA requirements. Yellow powder coated finish. Steel material. Casters not included. Dimensions: 18" H x 15-5/8" W. For use with SKU# 879.5478. Steel construction. Adjustable to any height up to 30'. Your weight does the work. Raise or lower men and equipment. Held secure to wood poles with a Positive Double Lock System. Raise to position with foot pump and lower with crank. Must be used in strict compliance with Federal OSHA regulations. New York State Approval No. 4781.
Qualcraft 2204 Pump Jack Workbench PLATFORM WORK TYPEII 225LB    OUTRIGGERS SET W/CSTR 4-5IN
Qualcraft Workbench/Guardrail Holder, For Wood Staging Slip-resistant surface. Easy-use locking hinge. Slip-resistant rubber feet. Height to platform 20?. Work Area: 11-7/8? x 37?. Bottom Width: 15-1/2?. Approx. Spread:  52-1/2?. Approx. Weight (lbs) 10. Approx. Cubes 1.7?. Specifications: 19.25 x 4.5 x 24 in. assembled, weighs 33 lb, 5 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-CISC, I-CISCTP and I-CAISC. Meets ANSI, CSA and OSHA standards.
Werner PS-48 Portable Rolling Scaffold M-MPP719 PLATFORM 7FT X 19IN  Werner AC10 2-Rung Long Body Ladder Jack
Planks are adjustable making multiple working heights. Also use as a workbench, storage, and hauling heavy materials. High grade wheels prevent marring by locking securely into place. Lightweight. Platform Dimensions: 46-1/8" x 8-1/2" per plank (two planks per unit), 41-1/2" x 17" total standing area (both planks combined), 30-1/8" highest standing level. Includes sliding locks for securing. 5/8? plywood. Meets ANSI, CSA and OSHA standards. Long body style attaches to two rungs. Supports 12", 14" and 20" wide stages or planks.
   
 
1 2