Home > PAINT & SUNDRIES > SUNDRIES > HOUSEHOLD GLUES > EPOXY ADHESIVES
Sort By:
1 2 3
Devcon S208 Epoxy Anchoring Adhesive Henkel Quick Set Epoxy Resin Loctite Mastermind Epoxy Resin
The syringe gives correct amounts of resin and hardener automatically. No measuring required. Includes snap-off-snap-on cap and handy mixing paddle. Works on metal, wood, chrome, glass, concrete, fiberglass, tiles, ceramic, china and more. Sandable and paintable. Starts setting in 5 minutes. 1,500 psi bond strength. Two-part adhesive consisting of an epoxy resin and a hardener. Bonds in 5 minutes. Dual syringe delivers equal parts. For a wide range of materials or a s a versatile filler for gap filling, surface repairs and laminating. Can be sanded and drilled. 3,200 psi. For complex multi-piece assemblies. For a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating. Does not shrink. Can be tinted with earth pigments, cement or sand for color matching. Can be sanded and drilled. Two-part system consisting of an epoxy resin and a hardener in a dual syringe. High Strength bond. Sets in 60 minutes. 3,000 psi.
Flow-Mix 21445 Epoxy 2 Ton S35 Medium-Cure Epoxy Adhesive ITW Permatex 84107 Permapoxy Epoxy
For application requiring fast curing and instant adhesion. Non-shrinking. Fills gaps. Flow-Mix applicator allows for self-mixing. Sandable and paintable. Works on glass, metal, fiberglass and ceramics. Starts setting in 60 seconds. 1,200 psi bond strength. Works on metals, wood, concrete, ceramic, glass, china, fiberglass and chrome. Formulated for high clarity, good impact and high strength. Extra strong bond for heavier objects, 2500 PSI bond strength. 30 minute working time. Non-shrinking. Sandable and paintable. Versatile, easy-to-use, multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. Sets in 30 minutes. Permanent strength up to 3,500 psi. Clear.
ITW Permatex 84101 Permapoxy Epoxy 3M 18094 Quick Set Epoxy ITW Permatex 84115 Permapoxy Epoxy
Multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. 3,400 psi. 5 minute set time. Use to repair metal, china, glass and plastics. Sets up in 5 minutes. Dries clear. Multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments.
Loctite 1360788 Epoxy Plastic Bonder Devcon S220 Impact Resistant Water Resistant Plastic Welder 5 Minute S205 Fast-Curing Thixotropic Epoxy Adhesive
Formulated to bond and repair plastic surfaces. Double syringe dispenses equal amounts of each component. Components react to produce a tough, rigid, high strength bond in 20 to 25 min. Does not shrink and is resistant to water, most common solvents and shop fluids. High impact resistance. Can be sanded and drilled. Bonds similar and dissimilar materials. Use on unprepared metals, ceramics, wood, concrete and hard plastics. Minimal surface preparation required. Resistant to weathering, humidity and wide temperature variations. Bonding strength 3,500 psi. Rapid-curing, general purpose epoxy. Starts setting in 5 minutes. Works on metal, wood, chrome, tile, glass, fiberglass, concrete, ceramic, china and more. Sandable and paintable. 1,500 psi bond strength.
2 Ton S31 Medium-Cure Epoxy Adhesive ITW 5 Minute Flow-Mix Automix Epoxy Protective Coating PC-11 Marine? Epoxy
Works on metals, wood, concrete, ceramic, glass, china, fiberglass and chrome. Formulated for high clarity, good impact and high strength. Extra strong bond for heavier objects, 2500 PSI bond strength. 30 minute working time. Dries clear. Non-shrinking. Resealable tip. Sandable and paintable. Rapid-curing, general purpose epoxy. Starts setting in 5 minutes. Flow-Mix nozzle allows for self-mixing and no mess. Works on metal, wood, concrete, chrome, fiberglass, tiles, ceramic, glass, china and more. Bond strength 1,500 psi. Starts setting in 5 minutes. Use to make wet surface and underwater repairs. Boat, water and stock tanks, spas,  tubs, plumbing and porcelain. Cures: wet, dry and underwater.
PC-Clear 70147 Fast Curing Medium Viscosity Epoxy Adhesive PC-Fast-N EZ 61411 2-Part Epoxy Adhesive PC Fahrenheit 25543 2-Part Hand Moldable Epoxy Adhesive
Medium viscosity liquid epoxy system with greater clarity than other epoxies. Can be used for repairs and projects. Fast curing, but allows ample time to apply and position the repair, 4 minute work time and total cure is 1 hour. Not brittle when cured, forms a tough and resilient bond. 2,300 psi tensile shear strength. Use as a general purpose adhesive to bond wood, metal, fiberglass, ceramics, glass and many hard plastics. Forms a water-resistant bond and is tough enough to be drilled, tapped, filled or sanded after final cure. Low-odor. 2-component. Cures rapidly at room temperature with exceptional tensile adhesion and peel strength to a wide variety of substrates. Forms a tough bond without the need for clamping. Flexible. 1,700 psi tensile shear strength. Designed to bond surfaces exposed to high heat. For quick emergency-type repairs like mufflers, engine blacks, grills, stoves, steam pipes and more. Cut, mix and apply. Allows a working time of about 8 minutes and cures for service in 60 minutes. Designed for elevated temperatures up to 500-degrees fahrenheit. Apply to clean and dry surfaces. Waterproof. Fast-setting. No sag. No Drip. Hand moldable. Can be sanded, drilled, sawed, and painted after thirty minutes.
Devcon 44029 Epoxy Putty Devcon 21245 Water Resistant Epoxy Anchoring Adhesive 5 Minute S210 Fast-Curing Thixotropic Epoxy Adhesive
Permanently repairs leaks, holes, cracks in metal, fiberglass, concrete and more. When fully cured, it can be drilled, filed, sanded and painted. Works on metals, copper, brass, steel, aluminum, iron, concrete and wood. Chemical resistant. For applications requiring fast curing and instant adhesion. Also use to fill gaps. Works on metal, glass, fiberglass and ceramic. Sandable and paintable. Starts to set in 60 seconds. Super-fast, general purpose. 1,250 PSI strength. Rapid-curing general purpose. Will not drip or sag. For vertical or overhead applications. Use on metal, wood, chrome, concrete, glass, ceramics, fiberglass, china, tiles and more. Sandable and paintable. Fills gaps. Bonding strength 2,500 psi.
J-B Weld 8277 Epoxy Adhesive J-B Weld 8276 Jb Kwik Weld Cold Weld Compound PC-Woody PC-WOODY 1.5OZ Wood Filler Epoxy Adhesive
Use Waterweld as an adhesive, laminate, plug, filler, sealant, electrical insulator, and to patch holes and cracks. It can be formed, drilled, ground, sawn, tapped, machined, filled, sanded, painted and applied under water. Stays pliable for about 2 minutes after mixing, sets in just 20 minutes, and cures fully in just a few hours. Waterproof and withstands temperatures up to 300 degrees Fahrenheit. Approved by the national sanitation foundation. Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. Use equal portions from the black and orange tubes. Mix thoroughly. Pliable for about 2 minutes after mixing. Sets in 4 minutes and cures fully in 4 hours. Water-proof, petroleum-, chemical-, and acid-resistant. Resists shock, vibration and extreme temperature fluctuations and withstands temperatures up to 300 degrees-Fahrenheit. Non-toxic. Bonds to virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper just about any porous and non-porous material. Can be clean up with soap and water before it sets. Replace missing/rotted wood with structural strength greater than most wood. Permanently repair window sills, frames, cornish, furniture, decking; rebuild missing wood; bridge or reinforce larger holes with screen wire or wood blocks. 30-40 minute working time. 90 minutes tack free, overnight for service, 1 week max cure time at 70 degrees Fahrenheit. After cure work and tool like real wood. Contains real wood pieces. Resistant to weather elements, mildew, dry rot, UV light, fresh and salt water, and chemicals present in pressure treated wood. No vise or clamp needed for most applications. Will not drip or sag when applied to flat, vertical or overhead surfaces. 850 psi tensile shear strength. 50-55 hardness shore D after 1 week of curing.
Loctite Mastermind Epoxy Metal/Concrete Resin Flow-Mix VersaChem Cold Weld Epoxy 2-Ton Epoxy Flow-Mix VersaChem Epoxy Syringe
For repairing, filling and rebuilding all metals and concrete surfaces. High strength bond in 5 to 12 minutes. Does not shrink is resistant to water and most common solvents. Cured epoxies can be drilled, tapped, threaded or filed. Rapid-curing epoxy. Works best on steel, copper, aluminum, bronze, metal and iron. Flow-Mix nozzle allows for self-mixing and no mess. Sandable and paintable. 1,500 psi. Start setting up in 5 minutes. Formulated for high clarity, good impact and high strength. Use on metal, wood, concrete, glass, ceramics, china, fiberglass and chrome. Dries clear. Application allows for self-mixing and no mess. 2,500 psi. 30 minute working time. Non-shrinking. Sandable and paintable.
J-b Weld 8265 Cold Welding Compound Display Elmer's E1009 Super Fast Epoxy Cement J-b Weld PlasticWeld Quick Setting Epoxy Adhesive
Bonds, fills and repairs aluminum, brass, bronze, ceramic, copper, iron, pewter, plastic, porcelain, steel and wood. For automotive, industrial, households, hobbies, farm machinery and equipment. Drying time 4 to 6 hours before handling. Not affected by gas, oil or water. One tube contains a mixture of fine steel in a liquid base. The second tube contains a hardening compound. Display includes six pair tubes, each pair wrapped with instructions. 1 Oz each. For indoor or outdoor applications where you need a fast, rigid bond. Perfect for use on most plastics, woods and metals. Two-part formula with hardener provides a fast 5 minute set time that reaches full strength between 12-24 hours. For a tighter bond use in conjunction with SKU# 060.7515. Bonds a variety of surfaces which include ABS & PVC plastics, fiberglass, metals and more. Sets in 5 min and cures in 1 hour. 3200 PSI. Dries off white.
   
 
1 2 3