Home > PAINT & SUNDRIES > SUNDRIES > ROOF & DRIVEWAY > ROOF COATINGS
Sort By:
1 2
Henry Premier Fibered Asphalt Roof Coating Henry Roofers Choice Fibered Roof Coating Henry 107 Non-Fibered Asphalt Emulsion Sealer/Dampproofer
Use for resurfacing and rejuvenating old, worn roofs. Resaturates and extends roof life. Use on asphalt roofs, metal roofs and composition roofs. Heavy-bodied asphalt coating, reinforced with non-asbestos fibers. Cures to a tough, flexible, weather resistant film. Resists damage from minor expansion and contraction by weather, temperature, and normal building vibration. Covers 60-100 per sq. ft. per gallon depending on surface type. Not for sale in California. For gutters and flashings. Designed to penetrate and saturate flat built-up and composition roofs. Provides a tough, durable, weather-resistant film. Contains non-mineral fibers. Can be used at lower temperatures. Not formulated for use on any surface other than horizontal FLAT. In hot weather, this product may flow from sloped surfaces. Not recommended for use on wood or asphalt shingles. Covers 100 sq. ft per 1.5 gallons. Depending on texture and porosity of surface. Not for sale in California. Black. Use as a protective roof coating for new or existing composition roofs with smooth surfaces, as a base coat for reflective coatings, waterproofing adhesive for polyester systems, and as an anti-corrosive protection for metal roofs, steel structures, pipes, and tanks above or below ground level. Solvent free, asphalt emulsified with Bentonite clay and water. Applied cold, non-flammable while wet, corrosion-resistant, and waterproof when dry. Does not crack, run, or sag under extreme weather conditions. Complies with ASTM D-1227-95 Type III, Class I. U.L Classified. FM approved. Covers approximately 100 sq ft per 3-4 gallons when applied as one coat.
Henry Roofers Choice Fibered Cold Process Roof Coating Henry 201 Fibered Roof Coating Quikdry 104Q Asphalt Spray Primer
Brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. Designed for bonding layers of asphalt coated base sheets. Eliminates burn and fire hazards of hot asphalt. U.L. Class A in a variety of roof systems. Use in applications with 25# or heavier asphalt-coated fiberglass base sheets, conventional mineral surface cap sheet, polyester fabric and bonding gravel or granule surfacing. Coverage varies with smoothness and porosity of surface coated. Penetrating, protective roof coating formulated to provide a tough, durable, weather-resistant film. Coating won't wash off if rain occurs before curing. Recommend for longwearing protection of metal roofs, smooth-surface or cap sheet SBS or composition roofs. Coverage is from 1.5 to 2 gallons per 100 sq. ft. Complies with ASTM Specification D-4479 -93 Type I. Not for sale in California. Used on edging and flashings, weathered composition roofing, concrete, and masonry surfaces prior to the use of solvent based asphalt coatings or adhesives. Covers 33 sq. ft. per can depending on porosity of surface.
Gardner-Gibson SK-7001 Elastomeric Roof Coating Snow Roof KST0000MC-16 Acrylic Based Elastomeric Roof Coating Solar Flex 287 Non-Fibered Elastomeric Roof Coating
A flexible acrylic coating that resists cracking and peeling while extending the life of the roofing substrate. Provides a protective barrier which reflects the sun's heat and destructive UV rays. This helps to cool roof surfaces and may cause a reduction of interior temperatures. Covers approximately 50-75 sq ft per gallon per coat. Used to waterproof and maintain mobile home and RV roofs. Reflects 85-percent of the sun's heat rays. Cures to form a highly elastic, long lasting, tough seamless membrane. Renews, seals, protects and prolongs life of roof. Durable and flexible over wide range of temperatures, to resist cracking and peeling. Protects against damaging effects of the sun, wind, snow, rain and ice. Covers 100 sq ft per gallon. Coverage depends on surface type. Specially formulated to resist mildew in hot humid climates. Reflects sun's heat and UV rays. Reduces air-conditioning cost and lowers roof and interior temperatures.  Apply brush, roller or spray application. Apply two coats of 1 gallon per 100 sq. ft. for each coat. Allow it to dry between 2 coats.
Snow Roof KST0000RB-16 Reflective Roof Coating Gardner-Gibson SK-7701 Sta-Kool Elastomeric Roof Coating Gardner-Gibson SK-7801 Sta-Kool Elastomeric Roof Coating
Bonds directly to the existing roof system. Durable and flexible over wide range of temperatures, to resist cracking and peeling. Cures to form a tough seamless membrane. Protects against damaging effects of the sun, wind, snow, rain and ice. Reflects up to 85-percent of the sun's heat rays. Lowers roof and interior temperatures. Covers 50-100 sq ft per gallon. Coverage depends on surface type. A premium, highly flexible, white acrylic latex roof coating featuring a thick, high-hide formula. Reduces heat build-up and expands and contracts to resist cracking and peeling. Provides a protective barrier which reflects the sun?s heat and destructive UV rays. Covers approximately 50-75 sq. ft. per gallon per coat. Meets Energy Star performance ratings. Advanced waterproofing technology, reduces heat-build up. Professional grade product forms a thick, rubberized shield that expands and contracts to prevent cracking and roof damage. Provides a highly protective barrier which reflects the sun?s UV rays. Covers approximately 50-75 sq. ft. per gallon per coat. Meets Energy Star performance ratings.
Kool Seal KST063300-16 Elastomeric Roof Coating Enviro-White 687 Elastomeric Roof Coating Kool Seal KST063600-16 Elastomeric Roof Coating
Use to protect buildings from the elements for years. Reflects 90-percent plus of the sun's rays. Forms a thick-rubber-like blanket of protection. Expands and contracts. Protects against moisture. Mildew and algae resistant when cured. High solids white coating formulated with acrylic polymers, resins, fillers and titanium dioxide pigments. Dirt pick-up resistant technology prevents dirt and dust buildup. When cured, the coating forms a permeable membrane, which prevents liquid infiltration, but allows moisture vapor to vent, or breathe out of underlying substrate. Covers approximately 2-3 gallons per 100 sq. ft. depending on porosity and roughness of surface. Use to protect buildings from the elements for years. Reflects 90-percent plus of the sun's rays. Designed to be durable in any climate. Forms a thick-rubber-like blanket of protection. Expands and contracts. Clings to your roof in all temperatures. Protects against moisture. Mildew and algae resistant when cured. Environmentally compliant. Helps to absorb sound.
Aqua-Brite 558 Aluminum Roof Coating Snow Roof KST000SRB-16 Roof Coating KST KST0000ES-16 Snow Roof Elasto-Seal Roof Primer And Undercoat
Can be used as a reflective coating for smooth surfaced built-up roofing and Modified Bitumen Membranes. Combination of premium aluminum flakes suspended in emulsified asphalt providing weathering resistance and reflectance. Reduces surface temperature and penetration of the sun's actinic rays to the roof surface. Helps reduce interior temperature and asphalt oxidation, and rapid thermal dimensional changes. Covers 1.5 gallons per 100 sq. ft. on smooth surface. Coverage varies with surface texture. Seals and protects. Bonds directly to most existing roof systems. Cures to form a tough seamless membrane. Protects against damaging effects of the sun, wind, snow, rain and ice. Lowers roof and interior temperatures. Durable and flexible over wide range of temperatures. Resists mold and mildew. Environmentally friendly. Resists cracking and peeling. Flexible to negative 36-degrees F. Covers approximately 50 to 80 sq ft, depending on porosity of surface and surface type. For sealing roofs and decks. Maintains surface integrity and extends the life of the roof's surface. Expands and contracts with the surface to resist cracking or peeling. Cures to form a high strength seamless membrane. Durable and flexible over wide range of temperatures. Flows easily into cracks and crevices. Forms a moisture barrier of protection.
Dura-Brite 587 Elastomeric Roof Coating Henry HE289046 Solarflex - Elastocaulk Roof Sealant Henry SS003 Fibered Roof Coating
Ponding water resistant, no primer needed, energy efficient releases 91 percent of the sun's heat. Expands and contracts without cracking. Elastomeric, acrylic roof patching compound specially formulated for repairing and preventing roof leaks prior to coating with an acrylic reflective coating and other water based coatings. Use on standard mineral surface cap sheet, concrete and stucco parapet walls, weathered metal roofing and more. Does not bleed through reflective coatings. Will not crack, craze, or lose adhesion when applied as directed to a smooth, clean, sound roof surface. Can be applied to a damp surface. Easy clean up with soap and water. Apply by brush or trowel. Covers 12-1/2 sq. ft. per gallon applied 1/8" thick. A heavy bodied cutback asphalt coating, reinforced with synthetic fibers. The coating cures to a tough, weather resistant film. It has good adhesion to brick, concrete and steel, and because of its ability to retain its pliability, this coating resists damage which may result from expansion and contraction caused by weather, temperature variations, and normal building vibrations. Excellent material for surfacing most asphalt based or metal roofs. It is recommended for resurfacing weathered asphalt roof surfaces. Aged asphalt roof surfaces are rejuvenated as the coating penetrates the worn asphalt substrates helping to restore its original properties. NOT recommended for use with coal tar roofs. Approximately 50 sq. ft. per gallon. Coverage rate varies depending on texture and porosity of surface.
Gardner-Gibson 0105-GA Roof Coating Henry Roofers Choice Non-Fibered Roof Coating Henry 107 Non-Fibered Asphalt Emulsion Sealer
Protective coating that provides a waterproof barrier over the existing roof surface. May be used over composition and built-up roofs. Fiber-reinforced, liquid brush grade. Covers approximately 50 sq ft per gallon. Rejuvenates old asphalt roofs such as roll roofing. Use over concrete, steel or existing asphalt roof surfaces. Cures to a tough, flexible, weather resistant film. Resists damage which may result from expansion and contraction caused by weather and temperature variation. Covers approximately 1 to 2 gallons per 100 per sq. ft. Use as a protective roof coating for new or existing composition roofs with smooth surfaces, as a base coat for reflective coatings, waterproofing adhesive for polyester systems, and as an anti-corrosive protection for metal roofs, steel structures, pipes, and tanks above or below ground level. Solvent free, asphalt emulsified with Bentonite clay and water. Applied cold, non-flammable while wet, corrosion-resistant, and waterproof when dry. Does not crack, run, or sag under extreme weather conditions. Complies with ASTM D-1227-95 Type III, Class I. U.L Classified. FM approved. Covers approximately 100 sq ft per 3-4 gallons when applied as one coat.
Henry Roofers Choice Fibered Roof Coating Henry Roofers Choice Fibered Cold Process Roof Coating Henry Premier Fibered Asphalt Roof Coating
For gutters and flashings. Designed to penetrate and saturate flat built-up and composition roofs. Provides a tough, durable, weather-resistant film. Contains non-mineral fibers. Can be used at lower temperatures. Not formulated for use on any surface other than horizontal FLAT. In hot weather, this product may flow from sloped surfaces. Not recommended for use on wood or asphalt shingles. Covers 100 sq. ft per 1.5 gallons. Depending on texture and porosity of surface. Not for sale in California. Black. Brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. Designed for bonding layers of asphalt coated base sheets. Eliminates burn and fire hazards of hot asphalt. U.L. Class A in a variety of roof systems. Use in applications with 25# or heavier asphalt-coated fiberglass base sheets, conventional mineral surface cap sheet, polyester fabric and bonding gravel or granule surfacing. Coverage varies with smoothness and porosity of surface coated. Use for resurfacing and rejuvenating old, worn roofs. Resaturates and extends roof life. Use on asphalt roofs, metal roofs and composition roofs. Heavy-bodied asphalt coating, reinforced with non-asbestos fibers. Cures to a tough, flexible, weather resistant film. Resists damage from minor expansion and contraction by weather, temperature, and normal building vibration. Covers 60-100 per sq. ft. per gallon depending on surface type. Not for sale in California.
Henry 201 Fibered Roof Coating Kool Seal KST062600-20 Elastomeric Roof Coating Gardner-Gibson SK-7705 Sta-Kool Elastomeric Roof Coating
Penetrating, protective roof coating formulated to provide a tough, durable, weather-resistant film. Coating won't wash off if rain occurs before curing. Recommend for longwearing protection of metal roofs, smooth-surface or cap sheet SBS or composition roofs. Coverage is from 1.5 to 2 gallons per 100 sq. ft. Complies with ASTM Specification D-4479 -93 Type I. Not for sale in California. Forms a thick, rubber-like blanket of protection. Reduces interior temperatures. Seals and protects. A premium, highly flexible, white acrylic latex roof coating featuring a thick, high-hide formula. Reduces heat build-up and expands and contracts to resist cracking and peeling. Provides a protective barrier which reflects the sun?s heat and destructive UV rays. Covers approximately 50-75 sq. ft. per gallon per coat. Meets Energy Star performance ratings.
   
 
1 2