Home > PAINT & SUNDRIES > SUNDRIES > PATCHING & REPAIR > TAPES, BEADS & PATCHES
Sort By:
1 2 3
ClarkDietrich VLCB Corner Bead Sheetrock 380041024 Joint Tape Sheetrock 382175020 Joint Tape
Dent-resistant reinforcement for finishing gypsum board corners in high abuse and moisture-prone areas. Size: 1-1/4" x 1-1/4". Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors. Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors.
Adfors FibaTape FDW6620-U Drywall Joint Tape ClarkDietrich M385 3-Way Bullnose Corner Cap National Gypsum JT2342 Joint Tape 250 ft L
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors. Provides a solution to finish corners at three-way 90-degree 3/4" bullnose intersections. Features extended tabs for easier alignment and a professional finish. Works well with both metal and vinyl bullnose corner beads. Eliminates the need for special corner bead applications and mitering. Conceals and reinforces wallboard joints. Buffed on both sides. Center creasing process allows folding for use at corners. Designed for use with ready mix or setting-type joint compounds and gypsum veneer plaster systems. High strength to resist distortion.
ClarkDietrich M285 2-Way Bullnose Corner Cap ClarkDietrich VLCB Corner Bead ClarkDietrich Quicksilver Corner Bead
For a professional finish where two bullnose corners meet at 90-degrees. Eliminates costly mitering of corners. Rust proof and dent resistant. 3/4" corner cap provides the component to transition bullnose corner beads to a crisp finish where inside corners intersect at 90-degrees. Can be applied to windows, closets, doorways, skylights, etc. Dent-resistant reinforcement for finishing gypsum board corners in high abuse and moisture-prone areas. Size: 1-1/4" x 1-1/4". Use to achieve durable, straight and crisps, clean 90-degree outside finished drywall corners. Hot-dipped galvanized coating offers superior corrosion protection. Strong metal reinforcement for drywall corners. Exposed nose of the bead resists impact and forms a screed for finishing. For humid, moisture-prone conditions and high-traffic areas subject to more than normal abuse. Nail, staple or clinch into place. Size 1-1/4" x 1-1/4".
ClarkDietrich 103 Deluxe Corner Bead ClarkDietrich Quicksilver Corner Bead ClarkDietrich SB50 L-Stop Bead
Provides durable, straight and crisp, clean 90-degree outside finished drywall corners. Electrogalvanized coating. Strong metal reinforcement for drywall corners. Galvanized for corrosion protection. Exposed nose of the bead resists impact and forms a screed for finishing. Nailed, stapled, screwed or clinched into place. Flanges are deeply knurled and perforated. Size: 1-1/4 x 1-1/4. Use to achieve durable, straight and crisps, clean 90-degree outside finished drywall corners. Hot-dipped galvanized coating offers superior corrosion protection. Strong metal reinforcement for drywall corners. Exposed nose of the bead resists impact and forms a screed for finishing. For humid, moisture-prone conditions and high-traffic areas subject to more than normal abuse. Nail, staple or clinch into place. Size 1-1/4" x 1-1/4". Provides clean, sharp edge at wallboard terminations. Rust proof and dent resistant. Raised shoulder and perforations enhance compound adhesion. Produces finished edge at panel terminations.
ClarkDietrich SB58 L-Stop Bead ClarkDietrich M859 Bullnose Transition Cap ClarkDietrich Quicksilver Corner Bead
Provides clean, sharp edge at wallboard terminations. Rust proof and dent resistant. Raised shoulder and perforations enhance compound adhesion. Produces finished edge at panel terminations. Transforms 3/4" radius bullnose corners into 90-degree corners for quick, easy baseboard or crown molding installation. Fastens in place with nails or staples, smooth to wall with joint compound. Saves time and effort. Use with metal, plastic, or paper bead. Use to achieve durable, straight and crisps, clean 90-degree outside finished drywall corners. Hot-dipped galvanized coating offers superior corrosion protection. Strong metal reinforcement for drywall corners. Exposed nose of the bead resists impact and forms a screed for finishing. For humid, moisture-prone conditions and high-traffic areas subject to more than normal abuse. Nail, staple or clinch into place. Size 1-1/4" x 1-1/4".
ClarkDietrich P21 Paper Faced Corner Bead ClarkDietrich Rip-Bead L-Trim Corner Bead Adfors FibaTape Quadra-Mesh Electrical Outlet Patch
Designed to form a true inner (90 degrees) corner. For use with any thickness of wallboard. Size 1" x 1". Used to finish wallboard edge where it abuts or intersects with suspended ceilings or other dissimilar surfaces. Joint compound is applied against bead cap, allowed to dry, tear-away strip is removed for a crisp, clean edge. Self-adhesive fiberglass mesh, backed with perforated aluminum for strong repairs. Perforated aluminum allows extra penetration and adhesion of compound. Designed for drywall and plaster. Easy to apply. Contains 1 patch.
ClarkDietrich CBB Bullnose Corner Bead 8 ft L x 0.013 in T ClarkDietrich BCB100 Bullnose Corner Bead 8 ft L x 0.028 in T Adfors FibaTape FDW8658-U Cement Board Tape
Use to create a smooth, rounded look to standard drywall corners. Adds contemporary styling and a sense of openness to any room. Bead is nailed, screwed or stapled in place and finished with joint compound.  Galvanized for corrosion protection and durability. Rugged steel construction. Electrogalvanized finish for superior compound adhesion. Gypsum board panels must be cut back 3/4" to accommodate the bullnose radius and ensure a flush fit. Creates smooth, rounded 90-degree corners that are attractive and dent resistant. Wallboard edges must be cut 3/4" back from the corner to accommodate the bead radius. Open mesh will not trap air that causes blisters and bubbles. Adhesive system requires no pre-plastering for easy DIYer and professional application, and for long shelf life.
Saint-Gobain FDW6618-U Fibatape Paper Drywall Joint Tape Homax 5504 Wall Patch ClarkDietrich 103 Deluxe Corner Bead
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors. Repairs damaged walls and ceilings. Works in high traffic areas. Holds galvanized metal drywall patch during repair. Provides thermal barrier. Heavy duty, superior strength. Provides durable, straight and crisp, clean 90-degree outside finished drywall corners. Electrogalvanized coating. Strong metal reinforcement for drywall corners. Galvanized for corrosion protection. Exposed nose of the bead resists impact and forms a screed for finishing. Nailed, stapled, screwed or clinched into place. Flanges are deeply knurled and perforated. Size: 1-1/4 x 1-1/4.
Sheetrock 382198010 Joint Tape ClarkDietrich P1UO Paper Faced Corner Bead ClarkDietrich VLAB Archway Corner Bead
Cross fiber paper tape designed for use with joint compounds in reinforcing joints and corners in gypsum drywall interiors. Use for 90 degrees outside corners. Eliminates corner cracks, chips and nail pops. Suitable for use on any thickness of wallboard. Size: 1-1/2" x 1-1/2" Used to reinforce and finish arched passageways, radius windows, and other curved wallboard constructions. Size: 1-1/4" x 1-1/4".
ClarkDietrich VBCB Bullnose Drywall Corner Bead 10 ft L x 0.028 in T Saint-Gobain FDW6570-U Fibatape - Peel N' Stick Wall Repair Patches Marshalltown DP4 Drywall Patch Kit
PATCH DRYWALL KIT 4X4IN
Our Price: $4.29
Creates smooth, rounded 90-degree corners that are attractive and dent resistant. Wallboard edges must be cut 3/4" back from the corner to accommodate the bead radius. For holes up to 5 inches wide. Can easily be cut with household scissors for several smaller applications. Laminated construction provides multi-directional reinforcement. Two square patches included. No-rust aluminum plate provides rigid backing. Self-adhesive patches. Fiberglass mesh eliminates the need to pre-plaster.
   
 
1 2 3