Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS > MASONRY SEALERS
Sort By:
1 2
Drylok 27512 Latex Based Masonry Waterproofer Henry PR175042 Premier Foundation Coating MOISTURE STOP 1 GALLON
MOISTURE STOP 1 GALLON
Our Price: $18.99
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface. For use on concrete prior to coating. Penetrates into concrete and reacts with the free calcium and water to form a gel in cracks, pores and capillaries to protect against the ingress of water and contaminants. This allows surfaces that were previously uncoatable, due to moisture, to be coated. Strengthens and seals from the inside out.
Quikrete 8730-02 Concrete Cure and Seal United Gilsonite 22113 Masonry Waterproofer Damtite 01071 Waterproofer Powder
Protects and seals concrete surfaces against water, salt, grease, etc. Promotes proper curing by retaining water in freshly placed concrete. Used for curing new concrete. Protective coating for masonry surfaces. Prevents moisture damage. Penetrates deep to seal and protects masonry against acids, alkalis, household chemicals, gasoline, oil and salt. Covers up to 400 sq. ft. per gallon depending on surface porosity. Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2).
Weiman 5134 Stone Spray-N-Seal Penetrating Sealer Weiman 5092 Stone Spray-N-Seal Penetrating Sealer Drylok 27613 Latex Based Masonry Waterproofer
Protects natural stone surfaces from staining. For stone countertops, floors, walls, vanities and even grout. Also for sealing all types of masonry, stucco, concrete and sanded grout. Has special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining and allows the stone to breathe and release moisture vapors. Safe for interior and exterior use and is UL Classified for slip resistance. Coverage varies depending on surface. Protects natural stone surfaces from staining. For stone countertops, floors, walls, vanities and even grout. Also for sealing all types of masonry, stucco, concrete and sanded grout. Has special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining and allows the stone to breathe and release moisture vapors. Safe for interior and exterior use and is UL Classified for slip resistance. Coverage varies depending on surface. Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Drylok 27513 Ready-To-Use Concrete Sealer WaterSeal TH.023111-03 Waterproofer Masonry Protector Homax 613 Wet Look Cure Seal
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Provides protection for all masonry surfaces. Prevents water damage. Coating resists mildew and UV damage. Helps maintain natural color of surface. Dries clear. Cover approximately 50-375 sq ft per gal. coverage will vary due to the type of pavers and porosity of surface material. Protects from oil, rust, water and sprinkler stain penetration. Use on exposed aggregate, flagstone, concrete driveway, patio tile, walkway, and garage floor. Low odor and non-flammable. Leaves a clear natural wet look. Ready for traffic 8 to 24 hours. Apply with roller, brush, sponge, mop or airless sprayer. Covers 150 to 400 sq. ft. per gallon depending on porosity.
Valspar 82092 Natural Look Waterproofer Valspar 82390 Wet Look Sealer Drylok 28613 Latex Based Masonry Waterproofer
Forms a waterproofing seal on concrete, brick, masonry, aggregate, natural stone and pavers. Formulated to protect against the sun's UV rays, water, gasoline and de-icing salts. Protective sealer allows the natural look of the surface to come through. Waterproofs and enhances the color and design of concrete, brick, masonry, slate and pavers. Formulated to protect surfaces against the sun's UV rays and damaging weather. Resists gasoline, oil and de-icing salts. For use over semi-transparent stain or bare concrete. For the most demanding conditions. For above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick. Formulated to resist mildew growth on the paint film. Stops 15 psi. Passes ASTM D-7088 Resistance to Hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Damtite M135 Sunny Dry Masonry Waterproofer Damtite 03550 Masonry Waterproofer SEALER CONCRETE WET LOOK 1 GAL
Heavy duty cement based coating for all masonry and concrete. Seals  pores, cracks, voids and smooths out rough surfaces. Protects against moisture penetration. Can be used above or below grade, new or old construction. Seals water and dampness out of concrete and masonry brick and block walls. Covers up to 255 sq. ft. High performance masonry waterproofer used for above or below grade applications. Alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco. Use on basement walls, retaining walls, fountains, birdbaths, planters and more. Fast drying, low odor and tintable to light pastel shades. Easy clean up. Reduces Radon Gas penetration through concrete block walls. Covers up to 150 sq. ft. (11.6 m2) per gallon. Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?wet look?, high gloss finish.
SEALER CONCRETE NATRAL LOOK 1G Zinsser 5001 Watertite Waterproofing Paint Valspar 82020 Solid Color Concrete Stain
Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?natural look?, low gloss finish. Guaranteed to stop up to 34psi of water pressure - twice the strength of other waterproofers. Prevents the growth of mold and mildew on the paint film for up to 5 years. Smooth, non-gritty finish applies easily to wet or dry walls. Ultra low odor oil-base formula has even less odor than latex paint. Great for basements and other interior/exterior above and below grade masonry surfaces. Watertite contains a mildewcide that prevents the growth of mold and mildew on the paint film only. Protects from sun, water and household-chemical damage. Renews patios, driveways, pool decks and other exterior masonry surfaces. Makes old concrete look new. Covers approximately 200-500 sq ft per gallon depending on surface porosity.
Valspar 82024 Concrete Sealer Valspar 82020 Solid Color Concrete Stain Henry PR1760074 Premier Foundation Coating
Protects from sun, water and household-chemical damage. Renews patios, driveways, pool decks and other exterior masonry surfaces. Makes old concrete look new. Covers approximately 200-500 sq ft per gallon depending on surface porosity. Protects from sun, water and household-chemical damage. Renews patios, driveways, pool decks and other exterior masonry surfaces. Makes old concrete look new. Covers approximately 200-500 sq ft per gallon depending on surface porosity. Environmentally friendly. Asphalt emulsion. For spray or brush application to existing or new, green or damp concrete and masonry surfaces. For below grade applications to foundations, both poured concrete and CMU block. No odor, soap and water cleanup.
Drylok 20713 Oil Based Masonry Waterproofer Drylok 20813 Masonry Waterproofing Paint Henry RC065070 Roofers Choice Foundation Coating
Ready mixed, tintable. Use on above or below grade masonry walls, cinder and concrete blocks, stucco, brick, basements and more. Resists 10 psi water pressure. Contains synthetic rubber and Portland cement. Performance conforms to Federal Specifications TT-P-1411-A. VOC Compliant. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Ready mixed, tintable. Use on above or below grade masonry walls, cinder and concrete blocks, stucco, brick, basements and more. Resists 10 psi water pressure. Contains synthetic rubber and Portland cement. Performance conforms to Federal Specifications TT-P-1411-A. VOC Compliant. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Cures to a tough, flexible, weather resistant film. Because of its ability to retain its pliability, the coating resists damage which may result from expansion and contraction caused by weather and temperature variation. Use as an exterior underground foundation coating and dampproofer for brick, concrete, cement block, and similar surfaces. May be used as an underground exterior foundation coating and dampproofer. Covers approximately 1 to 2 gallons per 100 square feet.
Valspar 82085 Masonry Waterproofer Damtite 02501 Waterproof Coating Gardner-Gibson 0125-GA Roof And Foundation Coating
Fortified with new, heavy-duty resin technology to provide maximum adhesion while protecting concrete and masonry surfaces with a watertight barrier to stop water. Low odor formula for use in basements. Use on properly prepared masonry walls and foundations, basements, cinder block, brick and poured concrete. Stops 15 PSI of water pressure. Mold and mildew resistant. Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water. A thin liquid applied coating designed to seal and penetrate exterior concrete and masonry surfaces while providing a moisture barrier. It can also be used as an anti-corrosive coating for below grade steel or metal piping. Seals and protects wood footings from decay and termites. Covers approximately 70 sq. ft. per gallon.
   
 
1 2