Home > HARDWARE > CONSTRUCTION HARDWARE > VENTILATION PRODUCTS > ROOF VENTILATORS
Sort By:
1
Durovent UDV2248 Rafter Ventilator Provent UPV2248 Roof Ventilator GAF Master Flow R50A Square Top Roof Louver
The polystyrene material provides a lightweight water resistant air channel. Ideal for high volume new construction or lower cost re-insulation. Perforated center line to fit all applications. Wide nailing flange and center strut allows for easy installation. Economical way to meet energy code requirements for attic air flow. Ideal for premium construction and for difficult applications like re-insulation and spray foam. "PROVENT" may be installed prior to the soffit panel installation without fear of blow-out. Made with Pro-Grade tear resistant high impact plastic. Rigid vent construction eliminates breakage during re-insulation. Full joist coverage for maximum air flow. Square-top metal utility vent; recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation; large capacity: full 50 square inches of net free ventilating area (NFA) per vent; versatile, available with square throat in heavy duty aluminum; easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed.
GAF Master Flow R50ABR Square Top Roof Louver GAF Master Flow RT65G Square Top Roof Louver GAF Master Flow RT65BR Square Top Roof Louver
Square-top metal utility vent; recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation; large capacity: full 50 square inches of net free ventilating area (NFA) per vent; versatile, available with square throat in heavy duty aluminum; easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed. Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed. Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed.
GAF Master Flow RT65BL Square Top Roof Louver GAF Master Flow IR65BR Slant Back Roof Louver GAF Master Flow SSB960A Slant Back Roof Louver
Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed. High impact resin. Scratch, crush, and dent resistant, with UV inhibitors to keep consistent color. 12 percent larger flashing with pre-drilled nail holes, and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4" x 10-3/4" opening, 20-1/4" x 18" flashing, 5-7/8"H. 65 square inches of net free ventilating area. CSA Listed. Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed.
GAF Master Flow SSB960ABL Slant Back Roof Louver Lomanco 750-GSB Slant Back Static Roof Ventilator GAF Master Flow SSB960ABR Slant Back Roof Louver
Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed. Three sides louvered for greater air flow. Large nailing flange. Heavy-duty galvanized steel construction. Fits all pitched roofs. Weather-tight seamed collar and metal screen insert for enhanced weather protection. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. 50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed.
GAF Master Flow SSB960AW Slant Back Roof Louver Lomanco 750-GSBR Slant Back Static Roof Ventilator Lomanco 750-GSWB Slant Back Static Roof Ventilator
Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed. Three sides louvered for greater air flow. Large nailing flange. Heavy-duty galvanized steel construction. Fits all pitched roofs. Weather-tight seamed collar and metal screen insert for enhanced weather protection. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. 50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Three sides louvered for greater air flow. Large nailing flange. Heavy-duty galvanized steel construction. Fits all pitched roofs. Weather-tight seamed collar and metal screen insert for enhanced weather protection. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. 50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size.
GAF Master Flow 12GNV4B Roof Mount Goose Neck Ventilator GAF Master Flow GT12E External Braced Deluxe Turbine Head Whirlybird GT12 Rigid Spider Internal Braced Turbine Ventilator
Ideal for appliances needing ventilation. Heavy duty screen deters animals and insects; large flashing for added leak protection. Black. Fits most brands of turbine bases. No.GT12E Dade County Approval 04-0618.01. Permanently lubricated ball bearings that ensures long life and no maintenance; fits roof pitch up to 7/12 pitch; easy installation and reduces winter ice breakup. Turbines are exhaust vents. 0.015" stamped galvanized steel. Features 20" x 20" base and 15-3/4" height.
GAF Master Flow AIC12 Internal Braced Rotary Turbine Ventilator GAF Master Flow GIC12BL Internal Braced Rotary Turbine Ventilator GAF Master Flow GIC12WW Internal Braced Rotary Turbine Ventilator
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved.
GAF Master Flow GIC12 Internal Braced Rotary Turbine Ventilator Whirlybird B I B-12 Rigid Spider Turbine Ventilator GAF Master Flow AIC14 Internal Braced Rotary Turbine Ventilator
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved. Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved.
GAF Master Flow GC12E External Braced Rotary Turbine Ventilator GAF Master Flow AIC14WW Internal Braced Rotary Turbine Ventilator Whirlybird B I B-12BR Rigid Spider Turbine Ventilator
Galvanized construction, externally braced for added strength. Heavy-duty construction ideal for coastal and high wind areas. Simple, 2-piece assembly for faster installation. Permanently lubricated dual bearing system for long lasting performance. Stainless steel ball bearings. 720 CFM air movement. No.GC12E Dade County Approved 02-0524.03. Nos.GC12EF & GC12EWWF Florida Building Code (FBC) Approved FL5027. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved. Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents.
Whirlybird B I B-12B Rigid Spider Turbine Ventilator
Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents.
   
 
1