|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bottom, jamb-mounted, universal-design 3-1/4"L x 1-1/4"H zinc plated steel bracket with 11/32"W white nylon tips. 1-5/8" opening for 1-3/8" thick doors. Includes four 3/4" x 15 gauge flat head drive nails.
|
Nylon bottom guide for pocket doors; jamb mounted; for 1-3/8" thick doors. Contents: 1 guide; 2- 3/4" x 15 ga. flat head drive nails.
|
This guide uses slotted mounting holes to adjust a pocket door horizontally. Can be used with any door thickness. Lighter weight for hollow core doors. Sold in pairs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 piece bottom guide; jamb mounted; slotted mounting holes for horizontal adjustment of pocket door; for use with any door thickness. Contains 2 guides; 2 installation screws.
|
Johnson Door Pull, Edge, Suitable For Use With: 1-3/8 - 1-3/4 in Thickness Pocket Doors, 2.94 in Length, 0.09 in Width, 0.62 in Depth, Bright Brass, For Interior and Residential Applications
|
Brass plated diecast pull. Pull retracts from flush position. Fits On: a 5/8" x 3-1/2" mortise, 3/4" deep. Contents: 1 pull; 2 no. 8 x 3/4" Phillips flat head sheet metal screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for joining two Johnson Pocket Door Frames.
|
Use for 1-3/4" thick doors.
|
Fits 1-3/16" center to center double "J" track systems. 1" diameter plastic wheels. Adjustable bracket is designed to mount on top of door. Convex roller edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Size: 3-7/8" x 3/4" x 1-5/8". Slim pak - polybagged.
|
Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lbs weight capacity. 1" x 3" plate size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardware kit for 1500 series pocket door frames includes: No.1120 hanger, No.1513 bumber, No.1550 guide, No.1712 adjustment wrench and screws.
|
Tandem wheels; top mount steel hanger for pocket doors; 7/8" round edge nylon wheel; for 1-3/8" thick doors up to 75 lbs each; fits on Cox. Contents: 2 roller assemblies; 4 no. 8 x 1-1/4" Phillips pan head sheet metal screws.
|
Includes (2) wheel/bracket assemblies, (2) mounting plates, (1) wrench, (2) guides, (1) bumper, instructions, (2) floor brackets, (2) wall brackets, and all nails and screws necessary for assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum track with convex rails, jump proof three wheel hangers. Heavy gauge steel components are zinc plated for a quality appearance. Maximum door width 36". Includes 72" long track, 125 lbs weight capacity standard hanger, doorstop, adjustment wrench, door guide and screws. Meets ANSI standards.
|
For finishing a pocket door frame opening. Cut to length and install, no special cutting necessary. Pre-sanded, factory primed and ready for painting. In addition to making a perfect companion to the Johnson 1500 series pocket door frames, the 1510 Jamb Kit will enable builders or DIY'ers to install the jambs according to our recommended instructions ensuring trouble free installation and operation. Size: 36" x 80" x 4-9/16".
|
Designed for installation in standard 2 x 4 timber or steel frame stud walls typically sheeted with drywall. Versatile frame can be adapted for use in thicker walls or cut down to accept any smaller size door. Removable aluminum track with low friction convex track rails, jump proof smooth rolling tricycle hangers, rust resistant zinc plated steel reinforced timber split studs and self adjusting floor anchors. For doors weighing up to 125lbs. When optional 1125 ball bearing hangers are used, can be used to hang doors up to 200lbs. Max door size: 36"W x 80"H x 1-3/8"T. Includes 1 track, 1 header length, 2 standard hangers, 2 floor brackets, 2 upright pair with floor anchor, 1 door stop, 1 adjustment wrench, 1 door guide, and installation hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
Easily assembled, structurally strong pocket door frame designed for fast installation in standard 2 x 4 timber or steel frame walls typically sheeted with drywall. Versatile frames can be used in block walls and adapted for use in thicker walls or cut down to accept any smaller size door. Designed to quickly fit into standard 2 x 4 stud walls. For doors up to 1-3/4" [45mm] thick quick assembly and installation. Frames can be cut down to fit any smaller size door. Max. door size: 36? x 96?. Max. door weight 200 lbs.
|
|
|
