Home > HARDWARE > WINDOW & DOOR HARDWARE > FOLDING DOORS/HARDWARE > BIFOLD DOOR HARDWARE
Sort By:
1 2
Prime Line N 6565 Door Guide Prime Line N-6538 Surface Aligner Prime Line N6640 Adjustable Pivot Bracket Assembly
Single door; nylon retainer. Used by many manufacturers. Includes four no. 8 x 3/4" Phillips pan head sheet metal screws. Universal design, zinc plated steel. Mounts to back of lead doors to maintain tight closure in openings not entered from both sides. Includes set of 1-1/8"H aligners and four No.8 x 3/4" Phillips pan head sheet metal screws. Stamped steel bracket mounts into top or bottom track; fits on "Slimfold" and others.
Prime Line N 6606 Adjustable Pivot Bracket Johnson 1808PPK1 Door Aligner Prime Line N6729 Top Pivot/Guide Rod Pin
Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16"L x 3/4"W overall. 1-1/4 inch x 2 inch, universal bi-fold door aligner, yellow zinc plated finish. For steel frame bi-folding doors. 1/4"OD spring-loaded steel rod with 3/8"OD x 5/16"H white nylon guide cap, 5-5/8"H overall.
Prime Line N6700 Spring Loaded Top Pin Door Pivot Johnson 1817PPK3 Bottom Mount Pivot Guide with 2-1/2 in Jamb Bracket Prime Line N6696 Adjustable Bottom Pin Door Pivot
Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 1/4"OD pin with 5/16"H tip and 5/8"H from base to tip. Replaces bottom pivot/jamb bracket pivot used on tap in type hardware. Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets.
PART DOOR FLDG ZINC PLATED    Prime Line N6672 Top Pin Door Pivot/Guide Prime Line N 6543 Adjustable Pivot Bracket
Used by many wardrobe door manufacturers. Solid-nylon guide and pivot. 3/8"OD x 1"H base and 3/8"OD x 5/8"H guide tip. Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16"L x 15/16"D x 1-3/16"H overall. For 1" to 1-3/8" thick folding doors up to 50 lbs. each. Includes 2 No.8 x 3/4" Phillips pan head screws and 1 No.8 x 1-1/4" Phillips flat head screw.
Prime Line N6673 Adjustable Bottom Pin Door Pivot Prime Line N6703 Spring Loaded Top Pivot Guide Wheel Prime Line N 6539 Wide-Track Slide Guide
Fits doors of many wardrobe manufacturers. Adjustable steel pivot with 1-3/8"H nylon base and 15/32"OD grooved tip sized for use with specified jamb brackets. Fits Kenna Frame doors and others. 1/4"W nylon wheel with 3/8"OD x 1"H nylon base self-adjusts up to 9/16"H from base. Fits on Acme doors when opening or closing. Steel springs with nylon retainer. For 1" to 1-3/8" bi-fold doors. 4"L x 3/8"H overall
Prime Line N6702 Spring Loaded Top Pin Door Pivot/Guide Prime Line N 6953 Bi-Fold Guide Roller Assembly Prime Line N6704 Spring Loaded Top Pivot Guide Wheel
Used by many wardrobe door manufacturers. 3/8"OD x 1"H nylon base and 19/32"OD x 7/16"H nylon cap. Spring-loaded, self-adjusts from 1-7/16"H to 2-1/16"H. 1/4"W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8" OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2" to 2"H. Used by many wardrobe manufacturers. Self-adjusting 5/16"W nylon wheel with 3/8"OD x 1"H nylon base. 2-3/32"H maximum.
Prime Line N6705 Spring Loaded Top Pin Door Pivot/Guide Johnson 1832PPK3 Top Mount Door Pivot Guide Prime Line N 6656 Non-Mortise Door Hinge
Fits Alliance doors and others. 5/16"H square nylon guide tip with 3/32"W slot (7/16" inside slot), 1/4"OD pin, and 3/8"OD x 1"H nylon base. Self-adjusts to a minimum 1-7/16"H overall. 3/8" and 7/16" post diameter. Replacement top guide kit fits: Johnson Hardware, Acme, Alliance, Cox, National, Sterling, E-Z Roll. Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws.
Prime Line N6545 Spring Loaded Top Pin Door Pivot PART DOOR FLDG NATURAL        Prime Line N 6992 Adjustable Pivot Bracket
Fits Acme and Cox doors. Spring-loaded 1/4"OD pin, 7/16"OD x 1-1/2"H steel base, and 3/8"OD x 1/2"H nylon guide cap. For 1" to 1-3/8" thick bi-fold doors up to 50 lbs. each. Includes optional guide cap. Used by many door manufacturers. Adjustable stamped steel bracket. 2-15/16"L x 1"D x 1-1/4"H overall. Bottom pivot with 7/16" OD stem, nylon base and steel pin that has a 1/2"OD tip with 3/8"W groove. Includes bracket, bottom pivot and 3 installation screws.
Prime Line N6701 Top Pin Door Pivot/Guide Prime Line N 6544 Self-Adjusting Spring Loaded Guide Wheel PART DOOR FLDG ZINC PLATED
Fits Johnson doors and others. Spring-loaded top guide and pivot with 7/16"OD x 1-5/16"H nylon base, and 7/16"OD x 1/4"H nylon cap. Steel base; fits Acme and Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H steel base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each.
HINGE BI-FOLD DOOR SNCKL      PART DOOR FLDG ZINC PLATED    Prime Line N 6611 Self-Adjusting Guide Roller Assembly
Used by many wardrobe door manufacturers. 1-7/16"H cut out allows for non-mortise installation. 1"W x 3"H overall. Includes 4 flat head installation screws. Adjusts bi-fold doors up or down, left or right. Surface mount for easy installation. Manufactured with cold-rolled steel and nylon. Self-adjusting 1/4"W nylon wheel with steel 3/8"OD base. 1-3/4"H overall. For 1" to 1-3/8" thick bi-fold doors up to 30 lbs. each. Includes two 1-1/4" nails.
   
 
1 2