Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER CUTTING ACCESORIES > ROUTER BITS 1/2 IN CARBIDE
Sort By:
1 2
Freud 12-116 Router Bit Freud 12-118 Router Bit Freud 26-104 Router Bit
Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
Bosch 85441MC Laminate Flush Trim Router Bit Freud 12-100 Router Bit Freud 12-110 Router Bit
Micrograin bits ideal for fast, smooth, accurate trim cuts with a shielded, compact 1/2" ball bearing pilot. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Freud 42-114 Flush Trim Router Bit Freud 12-136 Router Bit Freud 12-156 Router Bit
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Freud 50-104 Flush Trim Router Bit Freud 44-100 Flush Trim Router Bit Freud 28-104 Router Bit
Top mounted bearings on bits make them ideal for lettering or other template work where the work piece is being grooved or routed out. Cuts all composition materials, plywood, hardwood and soft wood. Use on portable or table mounted routers for template work. Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback. Drill through point allows self starting, while the pilot will act as a guide for template work. Cuts all composition materials, plywood, hard wood and soft wood. Use on portable routers for template work.
Freud 12-150 Router Bit Freud 12-172 Router Bit Freud 12-130 Router Bit
Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers. Cuts all composition materials, plywood, hardwood and soft wood.  Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Freud 32-102 Rabbeting Router Bit Freud 34-120 Round over Router Bit Freud 40-114 Chamfer Router Bit
Bits will produce super cuts on both surfaces of the rabbet. Can be used in joining boards or for letting in back panels. Cuts all composition materials, plywood, hard wood and soft wood. Used on hand held and table mounted portable routers. 1/2" bearing, 3/8" rabbet Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter. Chamfer size is easily adjusted by changing the height of the bit. Cut all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
Freud 44-108 Flush Trim Router Bit Bosch 85595MC Round over Router Bit Freud 34-124 Round over Router Bit
Bits can do more than just trim laminate, can be used for pattern work. Cuts all composition materials, laminates, plywood, hard wood and soft wood. Use on portable or table mounted routers. 3/8" bearing. Ground carbide with titanium for long life. Anti-kickback. Micrograin bits used for smooth, uniformly rounded edges. A lower depth setting produces a rounded corner with a decorative bead. 1/2" bearing diameter. Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter.
Freud 99-240 Router Bit Freud 38-106 Roman Ogee Router Bit Freud 50-509 Flush Trim Router Bit
Forms a strong joint between the sides and front of a drawer. Drawer fronts are formed horizontally, flat on table surface. Drawer sides are formed vertically against the fence of the table. Cuts all composite materials, plywood, hardwood, and softwood. Profile can be changed by changing the height of bit. Cuts all composition materials, plywood, hard wood and soft wood. Use on hand held and table mounted portable routers. 3/8" bearing diameter. Designed to produce precision cuts in almost any trimming or pattern routing application with bearings above and below the cutting edge.
Bosch 84624MC Tongue Groove Router Bit Freud 34-126 Round over Router Bit Freud 75-106 Router Bit
Micrograin bits designed to cut tongue and grooves on 1/2" through 3/4" thick material. To cut the tongue, use the complete assembly; to cut the groove, remove one slotting cutter. 1/2" decorative cut depth. Recommended for use with a router table. Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter. Up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Computer designed flutes provide the chip removal required in production settings. Suited for cutting mortices or routing deep blind holes. Excellent for grooves and dados in all composition materials, plywood, hard wood and soft wood. Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
Freud 34-127 Round over Router Bit Freud 32-524 Multi-Rabbeting Router Bit Set Freud 99-063 Router Bit
Bits are often used to soften the edge of furniture. Shear angle provides the smoothest cut available. Cuts all composition materials, plywood, hard wood, and soft wood. Use on hand held and table mounted portable routers. 1/2" bearing diameter. Bits will produce super cuts on both surfaces of the rabbet. Can be used in joining boards or for letting in back panels. Cuts all composition materials, plywood, hard wood and soft wood. Used on hand held and table mounted portable routers. Comes with interchangeable bearings to cut the following depths: 1/8 ",1/4", 5/16", 3/8", 7/16" and 1/2". Routes graceful inverted ogee profile on the face of the door, with a ball bearing guide to follow edge of straight or curved surfaces.
   
 
1 2