Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > AUGER BITS
Sort By:
1 2 3
Speedbor Max 3041001 Wood Boring Bit Speedbor Max 3041015 Wood Boring Bit Speedbor Max 3041002 Wood Boring Bit
Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
Speedbor Max 3041014 Wood Boring Bit Speed Feed 48-13-0048 Self-Feed Wood Bit Speed Feed 48-13-0058 Self-Feed Wood Bit
Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions.
Speedbor Max 3041004 Wood Boring Bit Speedbor Max 3041017 Wood Boring Bit Speedbor Max 3041016 Wood Boring Bit
Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Speed Feed 48-13-0068 Self-Feed Wood Bit Speedbor Max 3041005 Wood Boring Bit Speedbor Max 3041007 Wood Boring Bit
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks.
Speed Feed 48-13-0078 Self-Feed Wood Bit Speedbor Max 3041009 Wood Boring Bit Speedbor Max 3041018 Wood Boring Bit
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Tri-Flute design for faster chip ejection, cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed. Grooved hex shank prevents slipping in drill chuck or bit extension; fits all standard 1/4" quick change chucks. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Speed Feed 48-13-0088 Self-Feed Wood Bit Speedbor Max 3041019 Wood Boring Bit Power Drill I-100 49904 Dual Auger Bit
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Power Drill I-100 49905 Dual Auger Bit Power Drill I-100 49906 Dual Auger Bit Power Drill I-100 49907 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Power Drill I-100 49908 Dual Auger Bit Power Drill I-100 49909 Dual Auger Bit Power Drill I-100 49910 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
Speed Feed 48-13-0108 Self-Feed Wood Bit Speedbor Max 3041020 Wood Boring Bit Speedbor Max 3041021 Wood Boring Bit
Coated flutes for fast chip removal. Double wing spurs for clean hole cutting. 1/4" power groove shank fits all 1/4" extensions. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks. Cutting spurs have three cutting edges for added durability, full screw tip allows bit to self feed, tri-flute design for faster chip ejection, grooved hex shank prevents slipping, fits all standard 1/4" quick change chucks.
Power Drill I-100 49911 Dual Auger Bit Power Drill I-100 49912 Dual Auger Bit Power Drill I-100 49913 Dual Auger Bit
Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length. Full length heat treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole; coarse screw point provides fast boring in hard and soft woods. All bits have a 4-1/2" twist length and a 7-1/2" overall length.
   
 
1 2 3