Home > POWER TOOLS & ACC > POWER TOOLS > BENCH & STATIONARY > TABLE SAWS
Sort By:
1
Rockwell Bench Top Table Saw Leg Stand TABLE SAW 10INCH 15AMP W/STAND Skil Portable Table Saw Folding Stand
Aluminum main table with Quick release rip fence, 0-45 degree and blade bevel. Table size 26"  x 16". Max cutting depth at 90 degree = 3" ; Max cutting depth at 45 degree = 2-1/2". Accessories include: Spanner Wrench; Blade: 10" x5/8" x 24T; Rip Fence; 45 degree Miter Gauge; Push Stick. 15 amp motor. 4800 rpm. Extra large 24" x 20" die-cast aluminum table. Self-aligning rip fence automatically locks front and rear. Rips material up to 9-1/2" wide. Tool-free installation of blade guard and anti-kickback pawls. Oversized sliding miter gauge for miter cuts from 0-45 degrees. Bevel cut from 0-45 degrees. Rocker on/off switch. Optional sliding extension table expands rip capacity to 24". Includes: 40T Carbide-Tipped blade and heavy duty metal stand. Weighs 55 lbs. Features heavy-duty folding stand for fast setup and easy transport, 3-1/2" cut height capacity cuts through 4x materials, self-aligning rip fence, miter gauge guides work pieces when making cross cuts, EZ view measurements system for accurate settings and on-tool storage for all accessories and guarding system. Die-cast aluminum table with 20in x 26in table surface extends to 20 in. x 32 in. for longer work pieces. Specs: 5/8" arbor size, neg 2-degrees to 47-degrees bevel angle range, 6' grounded cord length, 2-1/2" depth of cut at 45-degrees, 3-1/2" depth of cut at 90 degrees, 5,000 no load rpm and 120V. Includes heavy-duty folding stand, carbide-tooth blade, 2 blade wrenches, self aligning rip fence and miter gauge.
Dewalt DWE7480 Table Saw TABLE SAW 10IN WORM DRIVE     SAW TABLE BARE 60V MAX 8-1/4IN
TABLE SAW 10IN WORM DRIVE
Our Price: $379.99
Compact 10" job site table say with Site-Pro modular guarding system. Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate. 24" of rip capacity, easily cuts a variety of larger shelving and trim materials. Site-Pro modular guarding system allows for tool free adjustments of the guarding components appropriate for each application. 15 amp 4800 rpm motor quickly rips through hardwoods with ease. On board storage provides easy access to the Site-Pro guarding components and push stick when not in use. Metal roll cage base offers greater durability than plastic bases. Blade can be adjusted 0-45 degrees for bevel applications. Weighing only 48 lbs., the table saw can easily be moved on and off the job. Rear feet adjust to level the saw on uneven work surfaces. Dust port allows for 2-1/2" vacuum hook up and minimizes clean up. 24T carbide blade enhances cut quality and prolongs blade life. Table coating reduces friction for smoother cutting. Includes: Miter gauge, push stick, 10" carbide blade and blade guard. (DW7450 Stand sold separately Orgill sku 573.9974) This wood cutting portable Worm Drive Table Saw is specifically designed for ripping. With the power and torque to tackle difficult cuts, bogging down is a thing of the past. 3-1/2" depth of cut and 25" rip capacity are big enough to rip plywood sheets in half. It also features a Dual-Field motor and smooth start-up for a saw that runs cooler and lasts longer. Weighs 49 lbs. Maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all common materials. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. The rack and pinion fence allows for fast, easy adjustments. Power-loss reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position. Site-Pro Modular Guarding system allows for tool free adjustments of the guarding. Metal roll cage base offers greater durability than plastic bases. Table coating reduces friction for smoother cutting. Table coating reduces friction for smoother cutting. 5/8" arbor size. 1-3/4" depth of cut at 45 degrees. Weighs 45 lbs. Includes table saw, carbide blade, non-thru cut riving knife, push stick, miter gauge, blade guard, rip fence and (2) blade wrenches.
Rockwell Portable Table Saw Trolley Stand SAW TABLE 60V W/BATT/CHARGER  SAW TABLE W/STAND ROLLING 10IN
Laser indicator for consistent accuracy. Cuts 4x4 in one pass. Base of the saw incorporates a sturdy fold-down trolley stand with wheels, onboard accessory storage and can be rolled from one jobsite to another by using the outstretched leg as a pull handle. The stand also features an adjustable leg extension for set-up on uneven surfaces. Specs: no-load speed of 5000 rpm, overall table dimensions are 28-1/2"x19" with a 30" rip capacity to the right and 11" on the left, depth of cut is 3-9/16" at 90 degrees and 2-9/16" at 45 degrees, dado width is 1/2" and  weighs 74 lbs. Includes: a rip fence, miter gauge, push stick, riving knife and sawdust collection bag. This table saw is maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all materials. Rack and pinion telescoping fence rails make fence adjustments smooth and accurate and provides the capacity to rip 4 x 8 sheet goods. Runs off of 20V/60V Flexvolt battery system for maximum portability. Power-loss reset prevents accidental re-starts following a power disruption when the switch is left in the "on" position. On board storage for guard, fence, wrenches and miter gauge. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. Site-Pro modular guarding system allows for tool free adjustment of the guarding. Metal roll cage base offer greater durability than plastic bases. Table coating reduces friction for smoother cutting. Depth of cut at 45 degrees 1-3/4". Max width to left of blade 12". Tool weight 48 lbs. Includes: (1) 60 volt Max Table Saw, (1) Non-Thru Cut Riving Knife, (1) 20 volt/60 volt Max Flexvolt battery, (1) push stick, (1) Fast charger, (1) blade guard, (2) blade wrenches, (1) rip fence and (1) miter gauge. Jobsite table saw with folding rolling stand. Engineered for rip-sawing and cross-cutting or ordinary wood, hardwood, plywood and composite wood materials. Soft start function reduces noise and recoil at start-up. Electric brake halts rotation of brake within seconds. Overload protection automatically shuts off motor. Bevel range of 0 degree to 45 degree for cuts ranging from 3-1/8" to 2-1/4". Easy adjustments for blade height or angle. 2-1/2" rear dust port can connect to a shop vac or duct collection system. On-tool accessory storage. 15 amp motor. No load speed 4,500 rpm. 28-3/4" x 22" table extension. Telescoping table extension supports 35" of ripping capacity to the right and 22" to the left.  Stable and durable fold and roll stand with large 8" rubber, all terrain treaded wheels. Includes 10" carbide tipped blade, blade guard assembly, anti-kickback pawl assembly, miter gauge assembly, push stick, rip fence assembly, outfeed support assembly, (2) blade wrenches, 5mm hex bar wrench, 4mm hex bar wrench, and 2.5mm hex bar wrench.
Dewalt DWE7490X Table Saw TABLE SAW 1-KEY KIT 8-1/4IN   Bosch Table Saw Stand
Rack and pinion telescoping fence rail make fence adjustments fast, smooth and accurate. Material support can be sued for narrow rip cuts. 28-1/2" of rip capacity easily cuts a variety of larger shelving and trim material. On board storage provides easy access to the blade guard assembly, fence, riving knife, push stick, miter gage, wrenches and cord wrap when not in use. Compact folding stand. Blade guard assembly allows for tool free adjustments of the guard for different applications. Flip over fence, allows for narrow rip cuts. Telescoping fence rails retract to create a small portable package. Features a 15.0 amp high torque motor with the power to cut pressure-treated lumber and hardwoods. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides ideal material support. Includes: 10" 24-tooth carbide blade, folding table saw stand, miter gauge, push stick, folding stand, rip fence, 2x blade wrenches and blade guard assembly. The Smart Guard System is the first ever quick and easy-to-use modular blade guard, anti-kickback pawls and riving knife system; provides superior control over the material and maximum visibility while cutting. Engineered for maximum trueness, the 'Squarelock' Rip Fence glides along the rail at a finger's touch or locks into place for solid and consistent cutting performance. Easy set up and take down of your table saw; heavy-duty construction and 8" pneumatic wheels allow the Gravity-Rise stand to handle the toughest jobsites. Integrated Sub-base increases tool life by handling jobsite abuse, while protecting the table saw's base. Built-in sub-base and tabletop carry handles add to the saw's portability from jobsite to jobsite. On tool storage for all saw attachments and tools. Soft Start and 'Constant Response' Circuitry for quiet and smoother start-up, reduced start-up torque and maintaining speed under load. Exclusive Arbor Lock for single wrench blade changes. INCLUDES: 10" Worksite Table Saw; 10" 40-Tooth Carbide Tip Saw Blade; Blade Wrench; Hex Key; Sliding Miter Gauge; 'Gravity-Rise'Table Saw Stand with Pneumatic Wheels; Smart Guard System.
Dewalt DWE7491RS Table Saw
Jobsite table saw with rolling stand. Rack and pinion telescoping fence system make fence adjustments fast, smooth and accurate. Material support can be used for narrow rip cuts. 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials. On board storage system provides easy access to the blade guard assembly, fence, riving knife, miter gage, wrenches, push stick and cord wrap when not in use. Rolling stand designed for easy set up and breakdown with ideal stability. Telescoping fence rails retract to create a small portable package. Flip over ripping fence allows for narrow rip cuts. 15 amp motor quickly rips through hardwoods with ease. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides superior material support. Includes: 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches and blade guard assembly.
   
 
1